Reseñas de clientes para Soldadora MIG VEVOR, máquina de soldadura MIG sinérgica de 200 A, soldadora multiproceso 4 en 1 MIG a gas/MIG con núcleo fundente/TIG con electrodo revestido/Lift, soldadora MIG de doble voltaje de 110 V/220 V con inversor IGBT y pantalla LCD.

This machine is terrible. If you get 15 minutes of use before it flashes and burns the wire back, your lucky. It came with loos hardware, difficult to trouble shoot when you expect it to work right out of the box. The algorithm that sets to auto mode is too cold (and slow). When the welder flashes to start, It jumps the voltage to high to (start the arc) and it melts the wire back and jams the gun. When the gun jams, the feed mechanism forces the wire through the rollers and bends it. If you set the roller tension too light (to try to avoid this), it doesn't push wire into the weld puddle well. I'm a seasoned welder and this has to be the worst machine I've ever used. I've waisted so much time trying to make it work. Don't buy this thing until they make significant improvements. Even in the video, it shows a cold clumpy weld. It was a waist of money.

Initial troubles with wire feed and the handle not locking in. This was surpassed by the fact that it has a 15 amp plug not a standard household 10amp. Beware the plug difference as you will have to either purchase a converter or get in an electrician to set up another circuit. Both of these add to the total cost making it not so cheap. Vevor helped out, mostly, but it was an inordinate number of emails to resolve these issues. Good system if nothing goes wrong with it. You get what you pay for. Synergic? Don’t get it. Doesn’t seems too responsive.

Príce

Huge fan in supporter of ever purchase tons of things can't beat the price and the amperage at this welder can produce.It is a little difficult to figure out manual settings you have to convert everything for welding charts and amps I've only used the waldor for a couple hours. And I have a little bit of an issue, it seems to have an intermittent issue with either the mid gun or maybe a ground but overall it welds and puts out some amps!

I know you get what you pay for but this was a bad buy. It won’t weld under 60amps. I’ve tried 4 different rods and i none of them make a difference. The stinger was the size of a popsicle and the ground clamp broke already so I’ve had to replace them both. I don’t even want to waste my time trying the tig setting.

La torche n'est pas d'une grande qualité, les éléments ne sont pas bien centrés les uns par rapport aux autres, tubé contact et buse en particulier.

Recomdable para bricolaje

Keine dutsche bedienung, gibt es einen Link? Kann de Fülldraht nicht einfädeln, Transport des Fülldrahtes stockt

Bonsoir, pourquoi je n'ai pas un document d'utilisation en Français. Cordialement.

Deberían llevar las instrucciones en español ,es un idioma hablado por muchos millones de personas