Reseñas de clientes para Soldadora VEVOR Pro MIG, máquina de soldadura MIG Pluse de 250 A, soldadora sinérgica 5 en 1 MIG Pluse/MIG de gas/MIG con núcleo fundente/TIG con electrodo revestido/Lift, soldadora MIG de aluminio de doble voltaje de 110 V/220 V con pantalla LCD.

Deberían llevar las instrucciones en español ,es un idioma hablado por muchos millones de personas

Un fil était abîmé dénudé on doit me rembourser j’attends toujours ….. de plus piètre qualité pour soudet

commandé un poste à souder synergique , mais celui reçu n'a pas cette fonction , le service après vente sont en train d'étudié le problème , j'attends la suite des solutions

Took forever to dial in a setting (gas mig 220v) Once I thought I had it, would lay a few nice beads, then junk. Super inconsistent and untrustworthy on both manual and the synergy thing. I contacted vevor and although they tried, they were no help hence why I think this was internal issue. They gave me a partial refund. But I wanted to ship this unit back for a full refund, makes me think they know it has issues.. Would not recommend. I got their 270a mig 220 with dials and that thing is much better.

Was missing a part , but they gave me a credit to pick up locally . Looks like a good unit , can’t use the mig until I buy the missing part .

The instruction manual sucks. It’s so hard to understand it don’t give you any of the settings that I’m used to the hell with the metric. Remember, we’re in America and I’ve contacted your customer service to buy a longer ground cable, which is too damn short nobody ever gets back to me

Witam Spawarka przyszła w ekspresowym tępie i jest to duży plus dla VEVOR . Testowałem ją z orginalnym drutem osłonowym + dokupiłem Co2 do spawanie MAG . Spawając dłuższą chwile rurki ze ścianką 0.2 mm spaw jest przetiopiony , ale spawarka strzela i spawy nie dokońca mi odpowiadają . Zmiana drutu na 0.8 bezosłonowej jest zbędna ponieważ spawarka jest za słaba i nie przetopi drutu . Spawanie gazem Co2 jest możliwe tylko drutem 0.6 z gazem Co2

Did not come with wire

I have been welding for almost 50 years and have used a myriad of welding equipment. This welder is not quality equipment nor designed to handle any were near the rated capacity. The mig gun is of very poor quality and only lasted a minutes before is started to melt down. Maybe a hobby type person could could use such a unit very infrequently but as for any mid size project I would never recommend this welder to any one It does not seem as if this was tested at the factory properly. When it did weld it did nice welds but only for a few minutes and the burn back with the wire sticking or melting to the contact tip was horrendous. If you want to learn welding look somewhere else.

This machine is terrible. If you get 15 minutes of use before it flashes and burns the wire back, your lucky. It came with loos hardware, difficult to trouble shoot when you expect it to work right out of the box. The algorithm that sets to auto mode is too cold (and slow). When the welder flashes to start, It jumps the voltage to high to (start the arc) and it melts the wire back and jams the gun. When the gun jams, the feed mechanism forces the wire through the rollers and bends it. If you set the roller tension too light (to try to avoid this), it doesn't push wire into the weld puddle well. I'm a seasoned welder and this has to be the worst machine I've ever used. I've waisted so much time trying to make it work. Don't buy this thing until they make significant improvements. Even in the video, it shows a cold clumpy weld. It was a waist of money.