Reseñas de clientes para Soporte para llanta de repuesto VEVOR, montaje para llanta de repuesto de remolque, capacidad de 160 libras, accesorios utilitarios para remolque. Se adapta a la mayoría de las ruedas de 4, 5, 6 y 8 birlos con patrones de pernos de 4", 4.25", 4.5", 4.75", 5", 5.5", 6" y 6.5".
Tipo de Suspensión con Perno
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
206 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Good product
Tipo de Suspensión con Perno
Worked as expected. Little tricky to get the tire mounted on it
0 personas encontraron esto útil
Traducir reseña a Español
It’s good but not great
Tipo de Suspensión con Perno
It works well but lining the lug studs up to mount the tire can be a real pain.
0 personas encontraron esto útil
Traducir reseña a Español
Support de roue de secours
Tipo de Suspensión con Perno
Très bonne fabrication acier de qualité, seul bémol j ai du modifier la platine car ma roue de secours est en 13 rien de très grave.
0 personas encontraron esto útil
Traducir reseña a Español
support
Tipo de Suspensión con Perno
support de qualité.
0 personas encontraron esto útil
Traducir reseña a Español
Spare tyre carrier review
Tipo de Suspensión con Perno
The carrier is well made, easy to assemble and works well.
Just 2 things wrong: rather than supplying bolts to bolt the tyre to the carrier, provide an option such as 2 or three sizes of proper wheel studs, so that wheel nuts will fit.
Second issue I have found: In my case I was hoping for the tyre tp sit higher after being bolter to the rear bumper bar of my caravan.
Other than those 2 things its a solid item
0 personas encontraron esto útil
Traducir reseña a Español
Good for a generic fit all
Tipo de Suspensión con Perno
Instructions have a lot to be desired but the assembly is fairly intuitive. Did have to buy some additional hardware locally but it went on and holds the spare.
0 personas encontraron esto útil
Traducir reseña a Español
MR 1
Tipo de Suspensión con Perno
Iworks great
0 personas encontraron esto útil
Traducir reseña a Español
Well made, but the bolts were wrong
Tipo de Suspensión con Perno
Installed OK but the bolts for the wheel carrier had too long a shank that I needed to file down
The square section shank of the bolts is too long, by about 3-4mm, so it protrudes on the other side of the square hole, and prevents the washer fitting tightly against the plate. So I had to file down the square shank enough to allow the washer to clear it.
Otherwise a good product.
0 personas encontraron esto útil
Traducir reseña a Español
Does not fit 8 lug wheels
Tipo de Suspensión con Perno de Zócalo
Description says it fits 8 lug wheels, but the included paperwork is blank behind the 8 on 6.5" pattern and only 2 holes will hit at any given time because the circle is not big enough. It also sticks WAY out the side and would be a burden. Seems like decent quality but I'm sending it back
0 personas encontraron esto útil
Traducir reseña a Español
Owner
Tipo de Suspensión con Perno de Zócalo
The product is good, had to weld it because it not fit the insert correctly, the problem I have is shipping, is terrible I prefer to pay for shipping it gets to you in a timely manner. It took 15 days to receive my merchandise that weighed 4 pounds that not acceptable to me, probably not buying from Vevor very again.
Mike Ebey
0 personas encontraron esto útil
Traducir reseña a Español