Reseñas de clientes para Taladro de banco VEVOR de 8 pulgadas, motor de inducción de 2,5 A, con velocidad ajustable de 620/1100/1720/2340/3100 RPM, mesa de trabajo inclinable de 0 a 45° y luz LED de trabajo, para madera y metal.

Received within 3 days or so, package in good condition. The Items were in good condition, contents matches description. --> In Short: I was impressed by how CLEAN everything was, no metal swarf or sand or other hard to remove grime, surprisingly no or very minimal burrs, good paint application. The main post/tube is well ground, including its Aluminium machined bottom cap. It's very thin tubing however, less than .049" wall thickness. --> Works fine without grinding noises, the slack in the quill+quill spring/gear +rack is noticeable (and expected) but doesn't cause excessive wandering in light duty use (twist drills up to 7/16" in soft wood, plywood, MDF/Hardboard/Particleboard) --> The provided 1/2" keyed chuck works smoothly, the table bracket keeps the table in place and only required minimal lapping* and lubrication. *Lapping the top flat on a surface plate to help in setting up the table square to the column. --> The quill has visible movement side to side + front to back and the Arbor has an odd Axial play (up down by about 1/4"), but doesn't cause excessive runout or wandering issues in light use yet. THE ISSUES: --> The Base Plate and the Table are BENT/BOWED, Had to replace/modify** : - Both made of stamped sheet metal, and both of them are BENT/BOWED. - The Table is not useable because of the excessive curvature! - The Base plate was not flat enough on its feet to keep the drill stable, and had significant burrs. ** I had spare parts from a broken down store bought drill presses that were gathering dust and modified them to fit this Vevor 8inch model. --> The MOTOR BRACKET keeps the motor misaligned: - With the motor angled (tilted) no matter the adjustment in tension, makes the belt grind itself on the pulleys. --> The DEPTH STOP is flimsy and unreliable to control the depth with any sort of precision. But it is useable for rough adjustment. Overall it works surprisingly well and I hope it will help me, along with the Vevor MX 8x14 Mini lathe I also purchased and reviewed, to repair my bigger Floor Drill Press purchased from a Canadian retailer for $$$$ (that retail store drill press was built so sloppy it drills worse than handheld, and it required so much cleaning of casting sand and swarf...)

Hasn't broken yet. Considered that pretty good since the belt grinder was broke up on receiving