Reseñas de clientes para VEVOR Taladro magnético, 1550 W 2 pulgadas de diámetro de perforación, 2922 lbf/13000 N 500 RPM Taladro eléctrico portátil con velocidad variable, máquina perforadora para cualquier superficie de mejora del hogar industria ferroviaria

Just started my welding business and have used this Mag Drill a couple of times. I can say it is 100% better than using a regular drill and a lot more precise than me using a cutting torch and although I don't have a plasma cutter, I'll go out on a limb and say The mag drill is better. Came packaged well and it works. Drills prefect holes. I would recommend it and I would purchase from this company again. You just can't beat it for the price.

I have built stuff all my life, lived on several farms, do a lot of experimenting building all sorts of items. I just recently bought this drill because I am getting ready to put a roof over two shipping containers. I need to drill 80 holes in the sides of the containers - I think about 16 gauge or 1.5mm thick steel. The thought of holding an electric drill and drilling by hand, while on a ladder (⅜" or 10mm holes), got me thinking about how to do this easy. I remembered using a magnetic drill once when I was a teenager - and I started looking around.$1k for a nice Milwaukee, $850 for a Makita - this Vevor at $250 works well. I haven't drilled the containers yet, but I've used it on several other projects - drilling over dozen of ½" holes in ¼" steel, some thru 2 layers of ¼" at a time. I drilled one 2" diameter hole with a Milwaukee hole saw bit. It did a very good job on all of these. The drill works, but it has some issues that could be improved (Vevor design and manufacturing please take note). The speed control isn't very good - when drilling large diameter holes in steel (what else would you drill with a magnetic drill???) the drill needs to turn at a constant slow RPM. When at low settings (I think the drill is just marked in 0-1-2-3... actual RPM numbers would be very helpful here) the speed will vary considerably with load. This is an annoyance, and requires some adjusting the speed as you start drilling, but stabilizes once the hole is started. The other issue is - and it may be the model I chose - seems to be quite a few similar mag drills by Vevor - I chose the most powerful at 1550W. The drill came set up to drill with end mill holders - for machine shop type end mills. There is an regular adjustable (key) drill chuck that will take up to ¾" bits (I think), but when I put the adjustable chuck on, then my standard sized ½" bit was too long. To use the drill with the adjustable chuck, I had to disassemble the up/down track mechanism and reassemble upside down. But my drill wasn't really setup to do this, but I was able to make it work. The tracks have adjustable tension tracks maybe 6 or more locking set screws on the track - and brass I think which is good because it slides well) It does not crank up and down with equal resistance, even though I adjusted it several times - too loose and the drill falls down, too tight and it's a b**ch to raise). But it is very useable, just I think Vevor needs to keep working on improvements, which I think they will. I have bought several other items from Vevor and all have been nice tools or materials (I forgot what they are, and they didn't get listed on my account). I will continue to look first to Vevor when buying tools, as the prices are excellent and the quality had been pretty good for tools that aren't in a production line constant daily use type work. I think Vevor is trying hard to be a quality supplier. I wish them well, and hope that they are all happy and heal

so far this has done all I need, worth the money for sure

Anyone that complains about this don’t have a f..kin clue.

Drills holes magnet seems good, only thing doesn't have a safety kick off for when the magnet loses contact

Good so far, works as expected

Love the thing

Drill in the slider seems slightly loose. when I put a 1/2" bit in it the bit was longer than the range to go up, so I had to clamp 1" tubing to my piece then mag lock it in place and drill for a bit, before putting it on the main drilling metal. Otherwise, I was drilling a piece of a fork lift fork, which was about 2" thick!!!, and it worked amazing. New bit, Oil and turn down to 1/4 speed and it was impressive. wish it had a way to hold the drill all the way up, it slides down all the way when not holding the handle.

I bought the cheap kit, and thus got the unit with a Jacobs chuck. The chuck is quite rough with pretty bad runout, so if you have an option, skip it. The rest of the unit is solid and heavy. I like the speed control. I think it should be wired such that the magnetic base should be energized before the drill can be used, so be careful. I used it to drill a hole in a cast iron porcelain clad sink, and it did a great job using ng a diamond hole saw. I haven't tried the cooling system but it's good to have. The magnetic base couldn't grip the porcelain but it worked out. The speed control is smooth and useful. Good buy, well made, capable.

Great Drill - only reason I gave it at 4 star is that the first drill I received was damaged and missing parts. You guys really need to work on your packaging. But other then that Vevor got another drill to me quickly and I'm very happy with it.