Reseñas de clientes para VEVOR Taladro magnético, 1550 W 2 pulgadas de diámetro de perforación, 2922 lbf/13000 N 500 RPM Taladro eléctrico portátil con velocidad variable, máquina perforadora para cualquier superficie de mejora del hogar industria ferroviaria

It's magnet should be stronger it doesn't hold in place while drilling upwards.

App sucks product great

Machine shoild have a feature to hold the slide in the raised position, but jamming a piece of thin sheet metal in the rack gear is a reasonably effective work around. The spindle housing gets rather hot after drilling for only several minutes. Is there some way to lubricate the spindle bearings??? Some smoke came out of the motor housing during some earlier use. I was running it at the lowest speed setting at the time while turning a 2" hole saw cutting mild steel, so I figured that it doesnt like that heavy of low speed use and I am avoiding using at the lowest speed setting or loading the motor up any more than absolutely necessary to get a job done. Also limiting the duty cycle as much as is reasonable due to the rapid heat build up in the spindle. This is a go-to machine for me on alot of jobs now and I really need it to hold up to somewhat regular use. Overall, it is a very heavy, powerfull and well built machine. Time will tell how the durability is. Price is unbeatable.

Works as supposed too.

Main reason for getting this was to drill holes for a replaceable cutting edge on a loader bucket. It’s difficult to drill a bunch of holes in something like that, can’t put it into a drill press so a magnet base works best for heavy drilling. The drill preformed very well, lots of torque, never stalled even once when breaking through on a hole which is common with a hand drill. It would be good to find shorter drill bits though because I was drilling 11/16 holes and if it wasn’t for having the new cutting edge in place for a template the bits I have are to long for the magnet base to attach to the surface. I didn’t have coring bits to try and with the price I didn’t want to chance one not working in hardened steel. Good to have the variable speed that is on this drill for that kind of drilling. Used cutting oil and got them all drilled with the same bit. For the price I’d say it’s hard to beat, compared to neat $1500.00 for a Milwaukee version. The magnet was really good, never let go considering substantial force needed to get these holes done. The rails a good and snug so it is quite precise and did not wander starting holes.

Pretty good tool! Worked well and I was pleasantly surprised by the dollar to value ratio! Will buy another tool soon! I recommend!

This thing works great but I can see that the build quality is a bit subpar. The power switch is flimsy and loose in it;s setting. It feels like it's about to break. It also has a Rpm surge problem at lower speeds. But I've been drilling super clean holes in 1/2" steel quickly and with no chatter so it's doing what I need it to do. And for this price I could burn through 4 of these for the price of most name brand drills. Well worth the price.

Très bonne persceuse mais le seul problème pour moi je n sis pas encore découvert comment elle peut rester a une hauteur fixe.

Works great the variable speed control is a nice option. For the price it is well built and sturdy. I don’t use it everyday so I can’t tell you about its longevity. I would recommend it to a friend.

Has a very slow start up but work great. Also had a nick in the electrical cord about a inch coming out of the base. I used some splicing tape and it's still functional. Other those minor thing it's a great machine.