Reseñas de clientes para Taladro magnético VEVOR, motor de 1450 W, diámetro de perforación de 2 pulgadas, fuerza magnética de 2922 lbf, taladro magnético eléctrico portátil con 6 brocas, velocidad variable, máquina perforadora para superficies metálicas, uso industrial.

Overall it's ok for the money but there's definitely more to be desired. The magnet isn't very strong and drill tends to lift easily when applying pressure to cutter. It doesn't have a quick release for changing cutters which is rather inconvenient. Also with the variable speed it loses power as you turn down speed compared to other drills with a 2 speed gearbox.

It came damaged. We talked to somebody via email about sending us the part and I could fix it but they haven't gotten back to me so I'm stuck in limbo

Don't make the mistake I did.. I over paid for this one. When I got all excited.. Not seeing it was not Variable speed and did not have reverse.. VEVOR helped me out by sending me the variable speed controller. I'm greatful.. Unfortunately the one I bought came in slightly damaged thru shipping.. I should have just sent it back and got the replacement with variable speed and reverse.. Instead of trying to figure out this one.

Cannot use regular twist drill bits, the travel will not allow it, a 1/2 inch bit touches my welding table with drill at the highest point. It came well packaged, I will know better next time.

This drill is advertised as having variable speed which it does not making it more difficult to drill larger holes

Does ok, doubt it will last. Just cheap no good. Vevor is the worst to deal with. Head moves side to side a lot. Would be half ok if you got more bits for the cheaper prices

While it is all right for DIY not robust enough for industrial work which is what i needed it for so overall its ok for small jobs but not good enough for heavy duty work Pity because i buy quite alot of vevor tools You need to make them more robust and appealing to heavy duty industry To compete with the top brands

The fitting drill vs spindle was so tight that it is really hard to mount the drill's. Furthermore the chuck adapter didn't even fit. -Comment - We have confirmed that each spindle is tested before leaving the factory, and only those within the standard range are shipped. If you cannot provide a video of the spindle measurement, we cannot make a judgment at this time. Please try using sandpaper to mark the inside of the spindle to enlarge the inner bore. -Hey, the manufacturer should have fine polished the inside. I think i have to sandpaper down the chuck adapter to make it even go in, phew. Not satisfied at all.

Assez dangereux, le perçage peut facilement enfoncer la base métallique, même verticalement vers le bas ; à éviter. De plus, la vitesse de perçage est inadaptée au diamètre du foret.

Leider hält der magnet nicht. Kann per Hand abgezogen werden Somit unbrauchbar für das was sie eigentlich gemacht ist