Reseñas de clientes para Guía para fresadora VEVOR, 60 pulgadas, portátil y ajustable, plantilla para aplanar tablones de madera, para bricolaje en carpintería.

Sled works well. A little bit of a learning curve setting it up for the first time. I would recommend.

Gut durchdachtes Gerät. So wie die meisten Produkte, die ich hier gekauft habe Würde ich wieder kaufen.

Buen material para trabajar con madera, poder aplanar tablas y dar dimensiones perfectas, el trineo es amplió para tablas con un ancho considerable

sencillamente perfecto, lo compre para planear una mesa y el resultado a sido mejor de lo que me esperaba.

It worked really good. The only drawback was the little bolts would work loose then the rails would move. That the only thing I have any trouble with. I would recommend this item.

I have a 31" bandsaw mill of which I mostly cut live edge pieces for counter tops and tables. Some of the harder woods I need to plane and this sled has saved me lots of time and money. I recently bought a table saw fence system to convert to a slab flating system however it didn't work out that well. After cutting this sled to a size I would mostly be working with it has served me well . I have made several counter tops and tables that have not only paid for the sled but has taken my wife and I out for several very nice dinners. Thanks Anyone interested in a slightly used table saw fence system you can contact me at [email protected]

Très bonne qualité robuste. livraison rapide, bien emballé. Montage un peux pénible pas de guide d'équerrage.

tutto ok ,un buon compromesso qualita prezzo facile da usare , personalmente non so come fissare fermare i pezzi da fresare

If I were to buy a sled again I would make sure of two things . 1) that the sled has some L-brackets that allow more Hight so you can put a thicker piece of wood in. I think there is another model that has those L-brackets . 2) the 4 black plastic clamps that hold the clear plastic base that the router is attached to ( & slides ) are crap . They don't tighten very well . I ended up using clamps to hold the router in place . Speaking of the clear plastic base ( 2 were supplied ) , it would be so much better if the base had some ball bearings to help it move as it is very tight in the slots & difficult to move left & right .

Wish there was a height adjustment but works anyways