Reseñas de clientes para VEVOR Máquina Pelacables Eléctrica Máquina peladora de cables eléctrica Máquina peladora de cables de alimentación 0.06-1.49in
Eléctrico 1,5 - 38 mm 11 Canales
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
1610 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Garbage
Eléctrico 1,5 - 25 mm 7 Canales
Didn’t come with safty switch so can’t even use it
0 personas encontraron esto útil
Traducir reseña a Español
Trustee
Eléctrico 1,5 - 25 mm 1 Canal
Never worked from the beginning and can not het any resolve or refund yet will update...
0 personas encontraron esto útil
Traducir reseña a Español
Not a handy device
A Taladro/Manual 1,5 - 25 mm 1 Canal
I mostly tried 1.5 mm cables. The smallest socket needs to be at the lowest position so that the cable doesn't slip. But then it's really time consuming to place the cable between the rollers. Also the blade doesn't seem to be exactly in the middle. I'm super disappointed and don't understand why the device has a high score.
0 personas encontraron esto útil
Traducir reseña a Español
Electrician
A Taladro/Manual 1,5 - 40 mm 1 Canal
This thing is junk. It doesn’t work as advertised
0 personas encontraron esto útil
Traducir reseña a Español
Mr.
A Taladro/Manual 1,5 - 40 mm 1 Canal
Very surprised and disappointed at lack of quality check of unit before packing and shipping.
Unit came partially assembled, Black plastic handle was already attached to metal handle arm which should attach to main body.
Main body comes with a black metal D-shaft section (drive flat section) so as to attach the handle arm securely.
The handle arm does not come with a corresponding D shaped hole in the arm,this would have improved its build quality. When trying to attach the handle arm to the shaft, it was noticed that the threaded pilot hole for the M8*12 hexagon screw (item 6 page 5) was not in the correct position on the arm.
The M8 threaded hole appears to have been incorrectly installed at the wrong end of the handle arm next to the black plastic cylindrical handle.
This has made the unit inoperable unless, we drill and tap the handle arm ourselves or replace the handle arm with an arm incorporating a D-shaft slot and M8 threaded locking screw hole.
When you purchase a piece of equipment, we would normally expect to be able to use it fairly quickly once bolted and screwed together.
In this situation, unit is unusable until handle issues are resolved.
1 personas encontraron esto útil
Traducir reseña a Español
not for smaller gauge wire
Eléctrico 1,5 - 38 mm 11 Canales
this doesn’t strip smaller gauge wire…
0 personas encontraron esto útil
Macchina spellacavi
Purtroppo non mi soddisfa
0 personas encontraron esto útil
Traducir reseña a Español
Vevor wire stripper
Eléctrico 1,5 - 30 mm 1 Canal
Overall it does what it's suppose to do. The motor turns the drive which pushes the copper underneath the cutting wheel. For some reason the wheel that moves the copper under the cutting wheel is crooked or off centered and it pushes the copper to one side and doesn't cut it or it gets stuck. Also as it moves it makes a weird sound like it's possibly misshapen. Also on the knob that you turn to adjust the depth of the cutting wheel when you add more depth the bottom of it will end up touching the cutting wheel as it's turning which nicks the blade or makes it dull. It did come with a second cutting wheel that seems to be sharper.
0 personas encontraron esto útil
Traducir reseña a Español
Owner
Eléctrico/Manual 1,5 - 38 mm 11 Canales
Over Priced Time Saving, yet Time Consuming
0 personas encontraron esto útil
Traducir reseña a Español
Misaligned blades
Eléctrico 1,5 - 40 mm 10 Canales
The blades and gears are not aligned properly and have been a pain to try and realign. After stripping a about 2500' of #10 it has gotten worse. I owned the previous model a few years ago and had much better results with it.
0 personas encontraron esto útil
Traducir reseña a Español