Reseñas de clientes para VEVOR 1 Pieza Soportes para Postes de Madera 8"x8" (203x203 mm) Base de Anclaje de Acero Inoxidable para Poste de Madera Tamaño Interno 185x198 mm para Barandilla, Pasamanos, Pabellón, Porche, Terraza

These are very strong anchors. I wanted to use some 1/2 inch L shaped concrete anchors instead of the anchors that came with it. Drilling some 1/2 inch holes was extremely difficult in that stainless. It would be nice if the bottom plate and the square plate came with additional holes for the 1/2" anchors; so you could pick that or use the anchors that came with the kit.

These brackets are fantastic, stronger than Simpson by far. I do suggest using the redhead brand sleeve anchors for anything structural, very easy to work with.

Bien construido a un precio razonable

Well built reasonable priced

the quality of the units from Vevor was great, price was better than i expected, made from better material than the other well known brand i was required to use on the first phase of the project. being made from stnls steel vs galv'n steel made these units far better.

Very good product, all stainless steel,

I didn't need stainless for my application but the price for stainless was better than the main name brand in galvanized that has a monopoly on bracket hardware everywhere else. The brackets came with a massive bag of Philips head stainless hardware that I ended up not using as I wanted structural screws/lags to anchor into the wood and larger (company name I won't use) concrete screws to lock the base plate to the foundation. These are all laser cut from the factory and covered in a protective film if you need the shiny finish. They shipped in an extremely well padded box with each piece of each 2-part bracket being individually wrapped. Post base has a cover plate that further lifts the posl off of the ground so factor that into your overall post height. I deducted one star on ease of use as I wanted to use standard 1/2" concrete screws and anchor bolts but these base plates have a ~5/16"-3/8" hole (probably metric) to accommodate the hardware that shipped with the plates. (I opted not to use.) Stainless is notoriously difficult to drill through and I burned up several step bits to add center holes to 20 base plates. Even with going slow using a ton of pressure and coolant, stainless likes to work harden to become impossible to drill. Other than my particular issue, these post bases are perfect for dimensional 6x6 posts (5.5"x5.5") I had 2 posts that were rough sawn and true 6x6 that had to be shaved to fit but it all worked out.

Good quality and durable. Have only used twice in the last few months, so time will tell. I would recommend.

Great quality in stainless steel, not galvanized. Packaged nicely. I wish embed bolts were larger diameter. I will try them out. They shorted me a mounting plate, still missing.

I was hesitant due to cost and expectation, but I have to say great job vevor. 4 Stainless steel 8x8 post brackets with raised base cover and secondary attachement plate. For the price I was pleased by what I recieved. I would order this again. Honestly I could not buy the materials and cut it for what I paid