Reseñas de clientes para Fundidor de cera VEVOR de 10 L para fabricación de velas, olla eléctrica extragrande para fundir cera, con pico vertedor fácil y control de temperatura de 9 niveles, fácil de limpiar para velas, jabón, cremas, belleza, producción a granel, negocios o hogar.

Works amazing, saves us so much time! We us it for beeswax. Fill it, pour, and fill it again! Works amazing!

Works great! I use it for candle, dipping, and it fits my candle dipper perfectly. It’s a game changer from using a traditional dipper in a pot of hot water on the stove or a hot plate. So much easier, faster, cleaner, safer, and more enjoyable.

So far so good. I've had the unit about a month and have used it at least 3-4 times so far. It definitely takes a little longer to melt everything the first time compared to my previous units but once you have it all warmed up it works great. It has a pretty large capacity so I bought an XXL whisk on amazon to stir all the wax. The unit doesn't get too hot luckily so it won't scorch the wax, but hot enough to melt everything quickly. the pouring spout has a bit of a lower flow rate than my last unit so it takes longer to fill the bucket, but the pour is smooth so less bubbles. I'm happy with it overall, it makes no noise and is nice and compact to put away.

Great tool works awesome so happy I bought 2. it looks great in the shop. It works even better. The dial being located on the one side forces you to work straight on or to your right that’s the only downfall and I prefer to work from the left that way it’s close to the edge of the table so I can load the wax. If I work straight on I have to reach over the table to load it, but that’s nothing to do with the quality this thing rocks and I have to be ambidextrous lol

Veryq useful, more efficient and safer than using a double boiler-ish for candle making. The stainless container to pour the wax into the candle is very small. However I use it to weight the fragrance oils. I usually make batches of 10 candles of about 8 oz

This thing has came handy when melting small amounts of wax for coating foundation for my bees. It clean and tidy and I love that it has an adjustable temperature setting so you don't burn the wax.

Works great. Great price. Using it for bees wax. The jacket on it is very handy to have when the grandkids are helping out.

FANTASTIC warmer for my candles. Actually better than the other ones Ive purchased from an actual candle site!

I bought this unit to make pure beeswax dip candles, and used it to make 382 of them by myself in one weekend. It managed to get the job done and for a third the price of certain more expensive units that have less capacity. I am satisfied with the price:value ratio. There are some areas for improvement: 1. The heat is delivered in "pulses", and during these pulses it easily reaches 200º F especially at the start of the melt, which can result in a small amount of burned wax that proceeds to convect in the melted portion. It would be nicer if the heat were more steady but less intense. As measured by a ThermoPro TP17H. 2. Despite the periodic intensity of the heat, it takes a very long time, up to 36 hours, to fully melt 25kg of beeswax if set to 150º F and up to 72 hours if set to 140º F. The thermal jacket on the sides is a very nice feature but it provides more safety to the user to prevent burns than insulation to the melt chamber. I appreciate not having to worry about burning my elbows. 3. I wish the plug cable was slightly longer. It was 1' too short where I needed to place the unit and I ended up having to use my 12' extension cable as all the shorter extensions I had on hand were not thick enough to safely use with the max current on this unit. 4. The spout is not connected to the heating elements and contains plastic components. Getting it to pour out the left over beeswax required a little persuasion from a handheld butane torch each time to melt the wax already in the spout, which I do not feel entirely comfortable with again due to the presence of plastic components. One cheap way to address this could be to simply add a heat pipe like you'd find in a PC from the surface of the heat plate to the connection point of the spout. There are also really nice things about this unit: 1. The unit is quite stable and does not have a tendency to tip over, even when full of wax. Great for safety! We love not being coated in 150º wax 2. The locking lid also seals and wax does not leak out if the unit is tipped or bumped. It's also insulated. Great for safety! 3. The thermal wrap on the outside makes a huge difference in the surface temperature of the unit, meaning no accidental burns when touching the device during operation. Great for safety! 4. The heater is fully capable of maintaining the temperature of the internal volume at wax melting temperature even when the ambient air is 62º F, once the wax is fully melted. 5. The volume. When full, a 12' dip candle can be made in this unit, although frequent top-offs of freshly molten wax will be required if making a large quantity.

A little difficult to empty out. Gets clogged occasionally, but overall it is nice to have, and works well.