Reseñas de clientes para Mordaza VEVOR ACCU Lock de 6'' para precisión, mordaza de fresado con mandíbula de 6 pulgadas para taladro de columna, fresadora y taladro de banco.

Very good vise for use both on my mill and on my drill press, it is tight, well made and very stable. This is a vise that works well for drilling, milling and general machine work.

Schon und gute Arbeit schnell geliefert sauber Sache würde ich wieder kaufen alles bestens Gut verpackt

Le poids respire la qualité, précis et à un bon prix. La finition est moyenne cependant, mais c'est pas le problème. Il manque des rainures dans les mors pour tenir des pièces rondes.

This is a pretty decent vise for a light weight milling machine or drill press. if you have a medium to larger machine, the castings are a little thin for agressive cutting. As compared to my Kurt, there is maybe 60% as much metal in the vise, which does translate to less strength. If you are using a standard bridgeport style mill the will probably be a solid choice. if you have a 7hp+ cnc, you may be able to break the vise with a heavy cut or at minimum experience some flexing that may cause trouble. In terms of dimensions, my example was well made and accurate enough for most things. Machining to +/- .001" per 6 inches is doable. Held parts square to about half that tolerance, which is ok. As with all tooling, you will need to invest time setting it up to be accurate. Wish it were made a little thicker, but it is a lot of vise for the price.

Works as intended. Vice is sturdy and is on my mill now for a few months haven't much to complain about.

Aan één kant was het sleufgat voor de bevestiging niet bruikbaar door een gietfout. Deze zat half dicht. Eerst open moeten frezen. Maar de klem is wel onwaarschijnlijk goedkoop dus dit soort missers in de kwaliteitscontrole moet ik maar voor lief nemen denk ik. Verder een prima klem. Ik heb hem al meerdere keren gebruikt voor freeswerk en zwaar boorwerk.

El usuario no dejó ningún comentario escrito.

Mal, el mecanizado de las chavetas de centrado no está alineado con las mordazas en los 160mm de ancho está desalineada más de 1mm.. tengo que mecanizar la para poder usarla

I ordered two vises in hopes they were close to the same height so I could hold one long piece of aluminum with the two vises. Height difference was almost 1mm.

Mounts easily, feels heavy duty and weighs a lot. Jaws are not parallel. Threads are really tight and hard to turn. Takes 2 hands to turn if not bolted down. 1 to hold the vice while you turn the handle with the other. As much as it weighs the handle should spin freely.