Reseñas de clientes para Mordaza VEVOR ACCU Lock de 6'' para precisión, mordaza de fresado con mandíbula de 6 pulgadas para taladro de columna, fresadora y taladro de banco.

Very good vise for use both on my mill and on my drill press, it is tight, well made and very stable. This is a vise that works well for drilling, milling and general machine work.

Schon und gute Arbeit schnell geliefert sauber Sache würde ich wieder kaufen alles bestens Gut verpackt

Le poids respire la qualité, précis et à un bon prix. La finition est moyenne cependant, mais c'est pas le problème. Il manque des rainures dans les mors pour tenir des pièces rondes.

This is a pretty decent vise for a light weight milling machine or drill press. if you have a medium to larger machine, the castings are a little thin for agressive cutting. As compared to my Kurt, there is maybe 60% as much metal in the vise, which does translate to less strength. If you are using a standard bridgeport style mill the will probably be a solid choice. if you have a 7hp+ cnc, you may be able to break the vise with a heavy cut or at minimum experience some flexing that may cause trouble. In terms of dimensions, my example was well made and accurate enough for most things. Machining to +/- .001" per 6 inches is doable. Held parts square to about half that tolerance, which is ok. As with all tooling, you will need to invest time setting it up to be accurate. Wish it were made a little thicker, but it is a lot of vise for the price.

Works as intended. Vice is sturdy and is on my mill now for a few months haven't much to complain about.

Imadło generalnie ok za tą cenę. Niestety opakowanie i zabezpieczenie towaru to dramat. Imadło zostało uszkodzone w dwóch miejscach. Opakowanie miazga. Ktoś musiał tym rzucać. Będę musiał sie jeszcze bliżej przyjżeć czy nie ma gdzieś innych uszkodzeń czy pęknięć.

Overall is a good buy. I would prefer a lower profile for my milling machine. Straight flat surfaces. For a garage work is pretty decent. Good price also.

Petit problème d'équerrage entre le mors fixe et les patins centreurs qui s'engagent dans la rainure de la table. Il y avait 5 /100 iéme de faux équerrage sur la longueur du mors qui fait 120 mm, j'ai dû bricoler les patins pour rectifier le problème.

The vise is very impressive in all aspects. My only concern was the packaging. It appeared that the box was dropped during transport and subsequently the foam packaging was broken in some cases but the vise was not damaged. As a result of the damage, the manual was scuffed and torn beyond repair. I was unsuccessful in obtaining a replacement copy via your online service and unfortunately did not find a download version in the internet.

Despues de un tiempo usándola, debo decir que cubre todas mis necesidades, excelente fabricacion a un precio muy accesible, las mordazas al ser reversibles te da la posibilidad de coger gran tamaño de piezas. Construcción robusta y duradera.