Reseñas de clientes para VEVOR 900 piezas de fijaciones ocultas para tarima compuesta, clips en T universales y fijaciones ocultas de plástico con tornillos metálicos, clips de polipropileno (PP) compatibles con juntas de 6,6 mm (0,26 pulgadas), color negro

Work fine with Trex. Fit perfectly in Trex install tool

the clips worked out as a good purchase

Going in I had concerns if these would be the right size for Trex brand composite, but they worked perfect! Stainless steel heads are notorious for stripping easily, no matter the brand—and these are no different. A piece of advice— If it stops or starts to strip then STOP! Back it out, toss it and use a fresh one. It’s a real pain if it completely strips and gets stuck halfway in, so try your best to avoid that at all costs. They did provide two of the longer screw driving bits. The first one wore out about 1/3 thru the box and I barely made it thru the job with the second driving bit. You may want to purchase a could extra long T15 driving bits. It’ll help a lot. Fresh bits don’t strip. After they get worn it strips the screws easier

The screws come about halfway screwed into the plastic tee. In order to position the fastener over the joist with 2 boards in place, the screw needs to be backed out so it is flush with the bottom of the tee. It takes a few seconds to unscrew the screw but before it is backed out enough to slide, the threads in the tee have stopped and the screw falls out. What was a brief, one handed operation with the Trex fasteners has now become an unwieldy, time consuming process, increasing the installation time by several times.