Reseñas de clientes para Pulidora eléctrica de suelos de hormigón VEVOR de 18 cm (7"), 1,7 HP, 1300 W, motor sin escobillas mejorado de 1720 RPM, para granito, mármol y piedra.

Very good quality and great price! I have used it for removing clear coat and epoxy chip paint and polishing concrete to stain. Worked really well 300+ square ft. In less then 2hrs. It came with 3 sets of grinding pads all 30# grit. The 30# is aggressive cutting! Would recommend to start with 120# or 80# much nicer finish! Motor has plenty of power just grinds away concrete , keep it moving. Manual is not very helpful doesn't even instruct how to install gring pads, No worries they are magnetic just put in place ready to go. Screw driver to pry off remove. Shipping was very good, not very good tracking however recieved on time and day promised.

Great machine. Makes short work of tile grout. Make sure you have a 20 amp circuit or you will trip braker constantly which it states in the description. Shipping was fast on time and it Came in a wood crate and fully assembled. No damage whatsoever. Hooked up a shop vac and dust collector to vac attachment worked awsome 90 % dust free. Would recommend .

Great product

Thanks for make deal with you

I have used this machine for not quite a year. work's very well for grinding concrete & mortar from previously tiled flooring. So far, I have had no issues with this machine.

With no experience with concrete grinding (epoxy floor project), I bought this machine as the best value I could find and one that runs on 10 amp. It comes with a 15 amp plug but runs fine through a 15A - 10A adapter. No trip outs during use including a 10m 15A lead. I am using it dry with a vacuum (on a separate circuit) and was surprised how quickly it removed old glue, paint and the concrete surface; it seems pretty aggressive. Maybe its my inexperience but I feel the 30grit pads supplied may be too coarse for my work so I have stopped and ordered some finer grit pads plus a replacement disk; I found one which will take 6 pads and I hope assist with keeping the floor smooth. In the first minute I had created some deeper (2mm or so) grooves which I will have to epoxy fill. Seems to have plenty of power and I will learn! Few small issues, the level adjustment could be smoother, the machine level changes as the adjustment is locked. Also the handle is not really that adjustable There are only two working positions, one quite high and the other about level with my elbows which is probably fine for me (6ft). I have two sheds and a garage to do (about 240sqM and I expect this will work out Ok.

Exactly what was needed for the job just make sure you have the correct amp circuit to power.

I've used the machine on a few jobs and so fat it's done a great job easy to use

Top machine fonctionne très bien ,et de très bonnes qualités

We've been renting a grinder much like this one for over$300 per user. This is making me money. Very nice tool and we're proud to own it.