Reseñas de clientes para VEVOR Baldosas de Garaje Entrelazadas 50 Piezas Baldosas de PP para Suelo de Garaje 305 x 305 x 13,4 mm Textura Antideslizante de Doble Cara, para Garajes, Sótanos, Talleres de Reparación, Plata

Habe sie erhalten Ware kam schnell. Habe die Platten noch nicht verlegt. Werde sehen wie es danach ausschaut.

Siehe Bewertung meiner Grossmengenbestellung, Ausführung wie beschrieben, einfache schnelle Verlegung, passgenaue Verlegungsnechanismus

Ausführung wie beschrieben, sehr schnelle Lieferung. Verpackung 1A, Farbe Argent etwas dunkler als am Foto, einwandfreie Passgenauigkeit mit Verlegungsmechanismus, einfache Verlegung, ,

Great for flooring a shed or garage. Strong enough for a studded snowmobile track and SXS

Looks real nice , but I feel not suitable for Industrial use. Looks real nice , but I feel not suitable for Industrial use.

Very impressed with this garage floor easy to lay and it looks fantastic and I would not hesitate to buy it again.

So far, so good. Nice quality tiles. Started placing tiles and they fit together and look as advertised. I'll update and attach photos when completed.

I am so happy with this flooring system! Goes together very quick and my concrete floor is far from perfectly level. It just snaps together and follows the contour of the existing floor. I am a construction contractor and would recommend to any DIY er.

Good quality tiles, easy to install. Some of the tiles were damaged while shipping and when garage is open the 1st 2 rows of exposed tiled buckle from heat of sun light. I am very pleased with the product over all.

Great price and very easy to install. They look good but seem to be a bit thinner than you might want - and may damage if you drop a heavy tool on one(?). Now that I am typing this, I may decide to test the scraps I have left over - but should have done that when we had a cold snap last week. Also not sure if they will support a loaded up floor jack. I have a car lift so I likely won't need to use my jack much. I rolled my heavy tool chest on it, and the wheels don't seem to be sinking into the tiles so my weight concerns may not be valid(?). Also, Vevor currently don't offer any edge pieces. It would be good to be able to finish the edge but so far I have been driving my heavy SUV over the unfinished edge and it is handling that very well. I have a fairly rough old concrete slab below, and I didn't want to spend a ton of time making it perfect for the tiles to lay on - and I first tried putting a section together on the slab. Walking on it didn't fee that good, as it moved up and down a bit, and made some slight grinding noises as only certain sections of the bottom tile support grid would contact the slab. I then bought some cheap linoleum to use as a sub floor and that seems to have made a big improvement.