Reseñas de clientes para Tornillo de banco esférico VEVOR, herramienta de ajuste de grabado de 5", tornillo de banco con rotación de 360°, 35 piezas de accesorios para grabado de joyas, bloque estándar para incrustaciones de piedras preciosas y grabado a pequeña escala.

Ottimo rapporto qualità prezzo Lo uso per incassatura e incisione gioielli Rispetto a blasonate Marche che trattano articoli simili questa boccia non ha niente i quasi di meno

I order this vise because I cannot afford a GRS at the moment and my work load is of a small/hobby studio. A fellow jeweler suggested I buy the 5" vise but decided to go for the 3", logistics was great, arrived on time and well packaged. I decided to try it right away and I had a small issue. The 3" vise comes with a plastic white base that has no grip so the ball kept slipping and sliding to the sides, I used some cloth, I use tape around the base and no luck :(. I called customer service and they answered right away, I wanted to exchanged it for the bigger one, not an option and unfortunately they had no solution for the slipping base either, they said the 3" vise is meant to be like that ;/, they offer me a shipping credit which is ok, thank you, but no solution for the slipping vise. So I went to "google" and found a GRS rubber base for this vise, I ordered and used it instead of the white plastic base, and it worked! For the price compare to the other high end vises is good, but certainly it could be A LOT better, is working well now that I have the rubber base. So VEVOR it was a small design issue that could be fix with an inexpensive rubber base that could be added to the item!

Has a bit of wobble but didn’t cost me an organ.

die zusatzteie sind nicht passgenau, bohrungen zu gross, zapfen zu klein muss modifiziert werden. leider. nicht zu empfehlen

Si no se me hubiera despegado el cuero y roto una patita de él sujeta sortijas, hubiera sido un buen producto. Pero se me ha roto demasiado rápido. Ojalá me lo puedan reemplazar.

Bonjour je viens de recevoir mon colis malheureusement mon boulet de graveur est complètement rouillé inutilisable j'espère en recevoir un autre en bon état bientôt.

I am still waiting for delivery of this item. It was ordered on October 21, 2025.

This ball vise is so sloppy it will not be possible to use. The machining tolerances are terrible. The vise jaws tilt about .025" on each side, the pins for the accessory jaws are loose and allow too much slop the bearing adjustment system does not work correctly. When adjusting the drag for rotation you basically have no rotation or full free rotation but you can't increase tension to have any drag. Also the smell is terrible, it is like a burning rubber smell.

I can only give the lowest rating possible because I received a power surge box not the ball vise I paid for. This company is horrible to deal with if there is a problem. Someone may be enjoying the vise but I am not. I did agree to a refund finally but was not asked to return the incorrect item. I would be afraid to try to do business with this company again.