Reseñas de clientes para VEVOR Bastidor de Servidor de Marco Abierto de 9 U de Profundidad Ajustable de 584,2 a 1016 mm, Bastidor de Servidor de Red con Ruedas de 360° y 4 Postes para Equipos de Red, Equipos AV, Enrutador

Very nice. I stacked two of them with some modifications to make it taller. I have servers, UPS and extra batteries. This is also very good if you like to modify it, for example to increase the load or fit PDUs, etc.

Good Quality product, I recommend

Tolles stabiles Rack. Zusammenbau war einfach.

Great quality, easy assembly, sturdy workhorse, casters are great for my application. Can't vouch for wall mounting system, but it looks beefy enough to hold whatever you can throw at it. Only MINOR issue is that all the threaded holes for assembly weren't cleaned out after powder-coating, so you'll need to either re-tap them for a silky assembly, or just power through with a standard drill-driver, which worked just fine. Arrived with the front and back faces pre-assembled, and the 4 depth arms pre-assembled at the minimum 23" depth (where I left them-can't vouch for sturdiness at full extension, but all steel felt plenty thick and well built for purpose everywhere else). The casters roll and rotate super smooth, even after loading. Lid (or bottom) was thick/sturdy enough for tools and supplies when installed half hanging over the back edge during installation work. 10/10 recommend that technique, and 11/10 recommend the product when considering the great price. - home user, 1st rack build

The metal plate that goes on the top was pretty badly damaged, the corner was bent meaning the plate had to be orientated in a certain way7 or it wouldn't fit. There is a lot of scrapes on the top plate. Everything else was alright, though the screws requiring an hex key is annoying, just use regular flat/phillips head screws.

Finally found a decent sized rack. Most of the new stuff isn't deep enough for older servers, this works perfectly, doubted it's strength to start with, but it's really solid once finished.

THEY COME WITH (2) SHELVES. (1) 1u shelf unit and (1) 2u shelf unit. Within the products photos it shows that it has 2 shelved but in the descriptions, it doesnt state if that. I can confirm the "12U Open Frame Server Rack with wheels" physically come with 2 shelves. No need to buy separate if you are concerned

La robustezza mi ha veramente impressionato, stabile, ha una precisione della fabbricazione che non si presta a tolleranze anche minime "Full Standard" Ruote ben dimensionate ed efficaci e che dire della dotazione dei piani "3 unità + 1 unità Rack Inclusi? " Una qualità prezzo-prestazioni per davvero straordinaria. Uso: posseggo un mixer da studio con un alimentatore Triale che ha un peso di 32 Kg, era sistemato su un rack statico ma c'è sempre la necessità di spostare qualcosa nella stanza laboratoriale in vista di un suo rimontaggio in una scuola per fonici e devo dire che il risultato di utiliy è quello delle foto, Insieme al grande alimentatore del Mixer ho montato anche uno degli amplificatori finali dei monitor studio e ne monterò un secondo, è perfetto.

minden ok

Was straightforward to assemble, just make sure you have appropriate tools, power tools preferred. Quality is good for the price, not the best but you get what you pay for. Holds all my equipment pretty well, except there is a little flex with my ups. My ups is a three battery 1500 ups so its a little heavier than most. But I put it on the very bottom so its not noticeable. Overall I would buy this again and if its all you need for your homelab or server it works really well. I would recommend it to anyone that only needs a 9u rack.