Reseñas de clientes para Cabina de pintura inflable VEVOR, 4 x 3 x 2,7 m, con potente soplador de 750 W y sistema de filtro de aire, cabina de pintura portátil para motocicletas, bicicletas y autopartes.

NICE UNIT BUT I SHOULD HAVE GOTTEN A LARGER ONE FOR THE WHOLE CAR!

Easy to set up and use, but if you can, go with the next size up. The space fills up fast when trying to spray cabinets and gat all surfaces

Ik gebruik de spuitcabine om mijn honden droog te blazen in de winter. Ideaal!

I purchased this spray booth to spray a guitar in my garage. it was easy to setup and had plenty of space inside for what i was doing. i created an interior frame with ladders and lumber that i hung the guitar from which also allowed me to turn the blower off over night and the booth didn't completely collapse. I also used the supplied strings to tie onto the anchor points near the top of the booth on the outside and tie them the ceiling of my garage which also helped it from collapsing when the blower was off. This particular booth does not have an exhaust port to hook up an additional blower to suck out some of the fumes which I believe some other vevor models do. So the fumes were still pretty strong in my garage but it definitely helped with containing any overspray.

La cabine gonflable fonctionne très bien, et les filtres font bien leur travail. Cependant, il faut faire attention à certains points : • Elle n’est pas complètement hermétique, donc la pluie peut poser problème. • Avec le vent, même léger, les attaches peuvent s’arracher, même si la structure en elle-même reste solide. • Ce n’est pas une tente de fête : il ne faut pas la laisser gonflée et l’utiliser comme abri si la météo est incertaine. En résumé, la cabine fait très bien le travail pour la peinture, mais il faut s’assurer d’avoir de bonnes conditions météo pour en profiter pleinement.

Literally took 5 minutes to put up by myself. Stayed pretty solid all day and fairly quiet. The ventilation needs major upgrading I'm going to add one or two dust collectors and build an inside filter

I was able to paint a 1972 Cutlass 442 in this booth. I had the hood, doors and fenders on separate stands from the body. In order to do this I had to cut out the “paint room” in the back. A razor blade made quick work of that. I was pleased with the booth, however the blower for the fresh air circulation wasn’t adequate to clear the booth. I had to open the filters to clear the booth so that I didn’t exceed my flash times. It has its quirks so planning ahead is imperative.

Super Sache, leicht anzuwenden und schnell aufgebaut. Bräuchte auch einen großen Druckluft Kompressor zum lackieren der leise und viel Liter in der Minute Ausgabelesitung hat. Machst mir bitte ein super Angebot für den mit 3 od wenn es habts mit 4 Motoren und großen Kessel. Dann kaufe ich dass nächste mal einen. Danke!! Ioan Ancateu

Sehr schnell aufgebaut und solide. Innen wird zum Arbeiten Licht benötigt. Anschluss einer Heizung funktioniert gut. Leider fehlt an der hinteren Oberseite eine Schlaufe, dann könnte man das Zelt auch ohne Gebläse zum trocknen hängen lassen. So muss es ständig aufgeblasen werden, wie eine Hüpfburg. Schön wären im Inneren auch mehr Schlaufen, um Zeltstäbe oder Beleuchtung installieren zu können. 4/5

This unit was purchased as a sand blasting booth. It could be used for lots of other things. The blower at 1100 watts is way more that is really needed. We run it on a 750 watt blower just fine. As ot doesn't come with a second blower we use the 1100 watt provided for retaliation. The construction is good for the price. The setup is self explanatory and was easy with 2 people. We had a vw bus in it getting sandblasted and it is keeping the mess contained nicely. It is set up in a building so we are not dealing with wind or rain. The D rings allow us to tie it to the ceiling of our building. That allows it to re inflated very fast even with the smaller blower. I would recommend this unit. https://youtube.com/shorts/2DPNiL4x4oI?is=36_cxald4lVVBqE0