Reseñas de clientes para Caja de lastre de 3 puntos VEVOR, capacidad de 800 lb, receptor de enganche estándar de 2 pulgadas, caja de lastre para tractor con volumen de 5 pies cúbicos, acero resistente, compatible con accesorios de tractor de categoría 1, color rojo

Not truly quick hitch ready out of the box. The lower two lift pins are about 1.5 i chest to narrow for U.S. quick hitches. Easily fixed with some grade 8 bolts, washers and nuts. Overall after adding the grade 8 bolts to create extensions for lift pins I am extremely happy with this product.

Had low expectations but was pleasantly surprised. Seems there are different versions out there so was happy this one looked like the pics with reinforced gussets where the 3pt pins attached. Not w/o issues though: the pin for the top link was too thick to fit thru my link (is it really Cat 1?) -had to improvise; as others have noted the 2" receiver isn't really 2" so some slop with the hitch - I haven't tried to pull anything with it yet, will probably be OK for what I do but not sure I would try towing a 3000LB trailer. Love the tubes to fits garden tools. was thinking of adding a partition to put tools that have a handle instead of just a pole but those are usually shorter tools and I just lay them across the top and secure with cord when I need them. While the green isn't exactly the right color the finish is perfect and I had to look really hard to see where the seems where welded. A really nice suggested feature would be a reflective slow moving vehicle triangle sticker. For the money and my light duty leisure work it is a great so far.

I was looking for something to weight down the back of tractor a little better than the box scraper or mower. Using sand in this ballast box really did make a difference. The unit came quickly and there really is not much to do in the setup. Real easy to put together. My only concern at the welds on some parts of the ballast. Only time will tell but for now it seems like a solid buy.

Overall it is a good item. Quality metal was used with decent welds. The quick hitch points could be of better quality. But overall I would purchase again if needed.

The Vevor ballast box works great, but its not quick hitch compatible unless you have a quick hitch with the adjustable top link hook. I purchased one from Vevor as well....the ballast box is built good enough for what its designed for....one of the lower 3 point pin arms was slightly bent when I received it, and it seems this is quite common....a few nudges with the sledge hammer and got it bent back into the proper position. If you buy one of these ballast boxes, buy the quick hitch that Vevor offers as well...it'll save you time and a lot of headache, plus you won't hate yourself when you try to remove it after you've filled the hopper with sand, gravel, or whatever. The 2 cylinders in the one side work great for holding a shovel, or rake. This box will definitely be useful when moving heavier items around with my pallet forks, and even doing loader work. The ballast box doesn't stick out as far as most tractor implements, so it'll allow you a bit better maneuverability in tight spaces. Its somewhat easy to use, if you have the quick hitch...if not, be prepared for a struggle, or pull the access door on the front of it to dump out whatever you used for ballast in order to remove the box from the 3 point.

box is light duty , and the volume will be hard to load within its maximum weight spec I have decided before mounting I will take it to the welder and have it strengthened

Seems pretty solid for the price. Pins were too long. Had to buy new ones. Was advertised as a cat1, but the box mounts are drilled at 5/8 cat0. Which means I had to find special cat 0/1 pins. They were a pain to find. Really should have the mounts drilled at standard 7/8 cat1.

I have no odeau how you can fit 800 pounds in it. Otherwise it is what is, a box

Fitted to my 20Hp compact tractor with a front loader so needs the bit of weight on the back. Technically works pretty good but the pins delivered with the unit for the lower link arms are a disaster . Absolutely stupid things, only about 15mm in Dia with bushings to take it to CAT1, 19mm. The bushings are too short so they slide out of the lift arm eye, and they absolutely look terrible. Had to go buy some proper CAT1 short pins.

It'd fine. It's tiny. Not sure what material you would need to put in it to get to the advertised weight. But it's fine. A steel barrel. Stone and a draw bar probably cost the same. I chose the lazy route. I stuck a shovel in the tool holder. It's stuck around with me.