Reseñas de clientes para VEVOR Caja de lastre para tractor de categoría 1 de 3 puntos, caja de lastre de enganche de capacidad de 800 libras, para receptor de enganche de 2 pulgadas, caja de lastre para tractor con volumen de

The product seems well made and will be great for my use. The only issue I had was with the top link pin shipped with the product. It doesn't fit (slightly too fat so the pin doesn't go in the hole) my BX 2380 (2025 model).

Pretty decent ballast box, why pay 1000-1200$ for a Kubota one, the only thing is the pin was to big for my 3 points hitch but not by much just had to machined a few thou’s out. It’s simple but do the tricks for way cheaper than big brand one.

Overall quality seems good, can’t beat the price. The top hitch pin was slightly too thick for cat 1. I had to grind it down to make it fit, but eventually just picked up a new pin. The green one isn’t quite John Deere green, but close enough.

Not truly quick hitch ready out of the box. The lower two lift pins are about 1.5 i chest to narrow for U.S. quick hitches. Easily fixed with some grade 8 bolts, washers and nuts. Overall after adding the grade 8 bolts to create extensions for lift pins I am extremely happy with this product.

Had low expectations but was pleasantly surprised. Seems there are different versions out there so was happy this one looked like the pics with reinforced gussets where the 3pt pins attached. Not w/o issues though: the pin for the top link was too thick to fit thru my link (is it really Cat 1?) -had to improvise; as others have noted the 2" receiver isn't really 2" so some slop with the hitch - I haven't tried to pull anything with it yet, will probably be OK for what I do but not sure I would try towing a 3000LB trailer. Love the tubes to fits garden tools. was thinking of adding a partition to put tools that have a handle instead of just a pole but those are usually shorter tools and I just lay them across the top and secure with cord when I need them. While the green isn't exactly the right color the finish is perfect and I had to look really hard to see where the seems where welded. A really nice suggested feature would be a reflective slow moving vehicle triangle sticker. For the money and my light duty leisure work it is a great so far.

box is light duty , and the volume will be hard to load within its maximum weight spec I have decided before mounting I will take it to the welder and have it strengthened

Seems pretty solid for the price. Pins were too long. Had to buy new ones. Was advertised as a cat1, but the box mounts are drilled at 5/8 cat0. Which means I had to find special cat 0/1 pins. They were a pain to find. Really should have the mounts drilled at standard 7/8 cat1.

I have no odeau how you can fit 800 pounds in it. Otherwise it is what is, a box

Fitted to my 20Hp compact tractor with a front loader so needs the bit of weight on the back. Technically works pretty good but the pins delivered with the unit for the lower link arms are a disaster . Absolutely stupid things, only about 15mm in Dia with bushings to take it to CAT1, 19mm. The bushings are too short so they slide out of the lift arm eye, and they absolutely look terrible. Had to go buy some proper CAT1 short pins.

It'd fine. It's tiny. Not sure what material you would need to put in it to get to the advertised weight. But it's fine. A steel barrel. Stone and a draw bar probably cost the same. I chose the lazy route. I stuck a shovel in the tool holder. It's stuck around with me.