Reseñas de clientes para VEVOR Carrito de combustible de 30 galones, tanque de almacenamiento de gas y 4 ruedas, con bomba de transferencia Manuel, contenedor de combustible diésel de gasolina para automóviles, cortadoras de

Very cheap and flimsy ground wire, it fell apart before assembly. Run your fuel through the filter, lots of metal shavings paint chippings and debris inside the hose and tank itself.

Buying this diesel fuel caddy is a game changer in any garage, farm or work shop. Simple assembly and ease of use. The caddy rolls well and the crank handle allows for smooth effortless fuel transferring.

Great price, good quality

Very good

Superblij met de aankoop. Makkelijk te installeren en te gebruiken.

Works but expect leaks. Hose from pump leaks, clamp was tight but hose is too large for fitting. Filler cap is cheap plastic and also leaks from vent. Probably around threads too but by the time i noticed there was diesel fuel cascading down and all over the top of the unit. It's the quality i expect from Vevor, so im not surprised. Pump works well enough.

So far everything is good. Hand pump works. Gauge works. No leaks. Handle was crooked when I assembled it. Drilled new hole on one side to make it straight.

Solid, well built. Easy assembly. Rolls around easily. Like it enough I bought a second one. The only thing is where the fuel hose connects to the nipple, it leaks a little. Can't seem to get the clamp tight enough and I don't want to split the hose.

I have wanted a fuel caddy for a while. It saves carrying 5-gallon gas cans. Unfortunately, the caddy was damaged in shipping and I find it difficult to communicate with VEVOR so I repaired the bent handle and used my hardware to replace what was missing. I have not filled the tank yet, but will soon and see how it works.

Overall, the unit is a great value. There are a few design related issues that could be improved upon, hence the three stars. The plastic fuel gauge cover has no seal against the tank flange. I added an oring so that no fuel will leak from the joint during the splashing of transport. Second, the pump mounts to the tank via a very fine pitch straight thread. Teflon tape will not seal this as it will on a tapered (pipe) thread. It leaked on first use. I am now trying a liquid sealant instead, and have tightened the jamb nut to prevent the pump from twisting when cranking. It remains to be seen whether this will fix the issue. Finally, the hose barb OD to hose ID fit is way too loose, even thought a hose clamp is provided. I had to use two hose clamps, next to each other to get a good seal.