Reseñas de clientes para Carro de herramientas VEVOR de 4 niveles con ruedas, capacidad de carga de 159 kg, carro de trabajo rodante con cajón y panel perforado, organizador de herramientas mecánicas con sistema de bloqueo para garaje, almacén y taller de reparación, color negro.

Me urge la fsctura y hasta el dia de hoy no e recibido nada me urge por favor

The metal was bend several places and we had to straighten it.

Difficult to assemble, mostly due to the extremely poor quality hardware supplied. Non-standard castor wheels that are fixed at one end make the cart not as easily moved as it should be. Being non standard castors, replacing them means modifying the cart. Vevor wont sell replacement castors. It is an okay cart, but I would not recommend it. Look elsewhere for something more suitable.

Poor quality. Disapointed.

looked good on the pictures when i ordered it. BUT plates are to thin and bend like a sodacan, the coating/paint layer is to thin and is falling off before i even start to use the cart. holes don't align making it difficult assembling the cart. plates for the side mount were bent in the wrong location making it impossible to assemble it correctly. Can't recommend this cart to anybody.

Il n'y a que 2 roues pivotantes et 2 roues fixes....c'est moins pratique car mon local exigu. En plus sur une photo et dans le texte il est spécifié 4 roues pivotantes. Je pense que 160 kg est un peu exagéré (oui 100kg max).

It was 85.00 dollars should have been 35.00 dollars warped and so flemsy I’m scared to put my tools on it !!! I tried to show video or pictures but this vevor won’t down load it . 85.00 is to much , don’t think it’s a good deal

I purchased this not as a tool cart but as a system to hold my new welder. The cart arrived in 3 days from order, box was beat up a bit but sealed and no holes. Unpacking I found Damaged pieces, (probably shipping damage) on 3 major pieces. Dug out the instructions and basically a joke. Good thing is I am a welder fabricator so I have the tools and knowledge to repair the damaged stuff and interpret the hieroglyphics into instructions to assemble properly, as for the cart, it appears that it will do exactly what I purchased it for and will update in the future if I see/find a reason to.

It's an ok tool cart. Nothing spectacular. I'll be honest, I had a hard time assembling. The peg board doesn't fit snuggly so I had to grind it to fit. hard to push as wheels are going all over the place. I'd be happy if this is still in one piece after a year.

Very cheaply made and over priced about 40 percent cheaper on another chinese seller. Contacted this seller and got no results from them and returns are a no go