Reseñas de clientes para VEVOR - Arenadora de vacío de 28 galones, sin polvo, con sistema de aspiración integrado de 1200 W para control de polvo y reciclaje de abrasivos, 60-110 PSI, máquina de chorro abrasivo de alta resistencia

The Sand Blaster works fine. The problem is that Vevor doesn't understand that the nozzles will naturally wear out. They don't offer replacement nozzles. I've had to buy an additional gun from another company in an attempt to keep using my sand blaster.

pas de notice d'utilisation ni aucun renseignement sur la taille de grain a utiliser et delai de livraison non respecter

The included hood is comical ,The pressure pot side is decent enough.The enginneering. Ot the gun isnr great as from new the. Block off plate didnt seeal well against the rubber stopper so sand was flowing continuously and it wore out the block off plate . There was supposed to be extra nozzles included but there was not after having second look amongst the packaging.. Not was there a hose clamp.. Vevor is going to send the missing nozzles and they are several weeks away. It would be better if you coulld also. Replace the steel portion rhat stops flow.. after 1/2 a bag i need to repair it somehow otherwisee the new nozzles wont seal and will wear prematurely. You can also find this unit cheapeer elsewhere

Bonjour pourriez vous m envoyer la facture d achat cordialement

Hallo bin leider nicht zu sehr begeistert, hab an original sandstrahl sand versucht es funktioniert nur sehr langsam, hab am druckmanometer den korrekten druck angestellt, sied zwar optisch ganz wertig aus, aber da paßt etwas nicht, kommt viel zu wenig Sand hab das Teil bestellt wegen Restaurierung meines traffic, schade eigentlich

Bonjour, j’ai bien reçu le colis en bon état, mais il manque l’axe des roues à l’intérieur. Merci de me le faire parvenir.

As hard as i try I can not seem to be able to dial and tune it in. It goes thru way to much medium to fast

Robinet en bout de lance pas efficace. Très rapidement inutilisable.

Pure con le istruzioni, non riesco a farlo funzionare come dovrebbe, non esce la sabbia, si forma il tappo nella pistola, e da li un incubo uscirne. Poi la gomma ad un certo punto si è sfilata dall'attacco che, a mio avviso voleva più grosso, e tutta la sabbia è uscita come una fontana, perchè avevo inclinato il serbatoio per tentare di sbloccarlo. Ora proverò un tipo di sabbia a vetro più fine e secca, auguri....

Sableuse qui ne fonctionne pas bien avec du sable (120 Mesh) car le filtre deshumidificateur n'est pas assez efficace. L'air injecté dans la bonbonne est humide et finit pas créer des bouchons dans le pistolet. Ne fonctionne que quelques minutes sans interruption au mieux. Cela fonctionne peut-être bien avec d'autres abrasifs moins sensibles à l'humidité, mais je n'ai pas essayé.