Reseñas de clientes para Conjunto de frenos eléctricos para remolque VEVOR, 30,5 x 5 cm, kit de 2 pares de frenos eléctricos autoajustables para eje de 3217 kg, montaje de 5 orificios, placas de respaldo para reemplazo de piezas del sistema de frenado (2 derechas + 2 izquierdas)

The electric trailer brake assembly was easy to install and worked well after installation. The only issue I had was the lock washers that came with the kit were too small and wouldn’t fit the threaded studs. I had to make a quick trip to the hardware store to buy the correct size hardened lock washers to complete the installation.

As usual, Vevor has great prices and they have always taken care of me. My only issue with this set is a small one. The bearings are delivered inside the drums with the grease seals already installed 100 percent. Since the bearings have to be removed to be greased, the new seals had to be knocked out. Those new seals were so tightly installed that they had to punched out from the inside and doing so deformed them and beat up the seal springs. I was super careful to make sure I was straight. They were installed very tight. I know Vevor would take care of me with replacement seals but I'm not going to wait to finish this job. I'm still very happy with Vevor.

Great brake product! However, please do not press the rear seal in on a bearing that has not been properly greased. This is a waste of time and money. I ended up buying new rear seals and bearings. Would have been a five star if not for the rear seal.

Brakes seem to be very heavy duty. Was disappointed they did not come with mounting nuts but was able to salvage the old ones I removed from the ones I replaced. Good fit.

I replaced a set of Dexters with these. The Vevor drums are so much heavier than the Dexter. If I have to pick on this set at all it’s that the dust caps don’t fit…no way no how could I get them on. Ended up buying 4 more Dexter and they fit fine!?

The delivery driver dropped the box on my porch like it was beneath her to walk all the way up my steps, this being said looking at the boxes it appears not to be the only time they were dropped, after opening the boxes all the brake shoes were dislodged and all parts loose luckily there is only a small chip on the side of one of the shoe's that does not appear that will have an effect on wair of the shoe but only time will tell. Vevor needs to watch out for there shipping company. I would ask for a replacement but don't have the time to wait for the replacement to get here.

Good product. No problem's. Just wish they would have included the (8) 7/16 fine thread nuts that hold the backing plate on. Thought I had everything needed and had to run and get those nuts. Not a big deal, just would have been nice. Otherwise love the product.

Poor instructions. No backing plate nuts or lock washers! Need(8) 7/16 - 20 nuts and lock washers. Also buy 2 new hub seals to replace the 2 that must be removed to repack the bearings with grease.

Good Value, as described

Nice product, but the hubs come assembled with the inner seal and bearing installed. To pack the inner bearing with grease prior to installing them, you have to destroy the inner seal to get the bearing out. The bearings are shipped dry. Why not ship the drums totally unassembled, then the bearings could be properly packed with grease,prior to installation. To install the breaks as shipped, and hoping that you will fill the bearings with grease via the grease fitting on the end of the spindle,is not going to happen. How long will the bearings last,without properly packed with grease prior to installation? Maybe 10 miles or so? Just a thought, ship the drums apart