Reseñas de clientes para Conjunto de frenos eléctricos para remolque VEVOR, 30,5 x 5 cm, kit de 2 pares de frenos eléctricos autoajustables para eje de 3217 kg, montaje de 5 orificios, placas de respaldo para reemplazo de piezas del sistema de frenado (2 derechas + 2 izquierdas)

These drums and brake units were an excellent fit, well-made and easy to assemble. They were exactly what I wanted and I assembled them on my trailer and greased them and it didn’t take long at all. Shipping: this whole order sat at the warehouse for six days before it got to the shipper and then it was seven days with the shipping company and I only live 200 miles away from the warehouse. I could’ve walked down there and got them faster than it took them to get it to me, my trailer was laid up for 10 days more than I expected. When the shipment got to me, the box looked like a bag. Parts were all over the place and the grease caps were bent. I couldn’t take a chance on getting replacement caps if it took 13 days to get my parts in the first place. So I had to re-shape the grease caps and make do with what I had. Vevor says that they package really well but I would beg to differ. Two weeks later I’m very pleased with the outcome. It’s just too bad that it took so long to get them.

Happy customer except. The nuts needed to mount we're not included. But good product and would buy again

Brakes fit perfect, size fit, the only thing is the automatic adjustment seem a bit loose but other wise seem to work .great price for what you get !

Have not got much use on this kit yet, but one thing I can say that I’m not happy about is they do not include the 7/16t nuts to mount the backing plate to the axle. Also, everything comes preassembled with no grease, so you have to remove the seal from the back of the hub and in the process destroy the seal in order to get the bearings out to properly pack them with grease and then buy new seals to replace and reassemble.

Three stars because 3 of the 4 are holding up well but one of the self adjusting brake cables came off the top bolt and the lever on the bottom cut into my drum so I had to replace the entire unit within 300 miles and that was done by roadside so expensive is an understatement

Shipping was faster then what was listed. Parts looked great but edges are super sharp so watch when you handle during install. Even after setting the brakes and burnishing them they are still very weak. even at max gain. I wouldn't use these on a heavy duty trailer but ok for a light duty trailer.

Everything you need however it comes fully assembled and bearings are not greased so you will need new seals regardless. Also you will need 7/16x20 nuts to fasten to bracket. Also the first shipment didn’t make it however they were quick to get another order out.

The inner bearings and seals are pre-installed with no grease. So you have to remove the bearing and seal before installing. Had to buy new bearings and seals due to damaging when removing. Need to ship them uninstalled.

I got my new trailer brakes kit and the rear seal and bearing was installed and there was a lot of metal small shaving all over I was not happy with this kit fair price but you will need to remove rear seal by damaging it have to buy new one and getting the all metal shavings out to be safe or u will have to buy all new kits I am not happy with vevor for this one and there phone it not working to talk to I think this is what they want to email to take more time up to get you out of return time window its all I am asking in refund or 3/4 of my money back I should not have to fix new brakes kits

Both hubs came with damage, and improper assembly the shoe on one had a significant bend the metal pad, which while shouldn't keep it from operating could cause that lower pad corner to have less contact... The other one the star adjuster was assembled wrong, not attached to one side and tucked under the spring at a bad angle... it was a pain to get it back in place... I would have returned them but I just couldn't wait for replacements, so I took my own time and effort to make them functional...for a less experienced person who's not familiar with how these work they might get bolted on as is and not work properly at a bad time... I'd go with a different brand myself next time, brakes aren't a product to have poor quality controll, whoever put the ok sticker on them was asleap at the wheel