Reseñas de clientes para VEVOR Cortador de Azulejos Ancho de Corte 35-1200mm Cortadora de Piso Laminado Espesor de Corte 6-15mm Cortador Manual de Azulejos de Aluminio Corte con Láser para Cortar Azulejo de Porcelana

Loved the 24" tile cutter and it worked beautifully with one exception. The tubular cover at the top of the centre line is a little too high and the tile does not sit comfortably when cutting. Would I buy it again - Yes.

Todo perfecto corta super bien y sin apretar nada ni el diamante ni la palanca por el precio qe tiene es perfecta

I purchased this to cut 48" long tile because tile saws won't handle something this large (unless maybe you spend a huge amount of money). This tool scores the tile and you snap it to break the tile. It worked well for one type of tile but was difficult to get another tile to snap that was a little thicker. The break is not as clean as a wet tile saw, but I was able to put the cut edge along the wall so it is covered by trim anyway. The laser is nice to get the tile lined up for the scoring. Mine was aligned pretty well along the entire length of the cutter, but some have commented that this could be off. There is a little adjustment for the rails. I wouldn't pick this tool up with the rails - it is tempting because it makes for a great handle, but you may bend the rails. Overall a good tool at a nice price.

Clean cuts every time. Instructions could be better for the attachment of angle accessories. Laser light difficult to line up with score wheel accurately but overall very happy.

It cuts so easy , a D.I.Y must have . handles 600mm porcilian tile easily, straight and clean.the only problem I have with it is the cutter is not aligned straight and dose cut straight unless you mark at each end of the tile and make sure it`s going to those marks. I tried to realign the rail and got it to within a couple of mm and it is a pitty that I cannot just put a tile in and just cut it instead of fiddling around linnig up marks because the Rail is not square to the cutter.

The laser light is not neat enough and incorrect guidance. So it make the cutting edge was not correct as required. The balance of the device is not good when putting the tile on to cut. You have to hold the tile firmly when cutting

Todo muy bien . me llegó muy rápido. Calidad es bien con su precio.tiene regla pequeña además todo perfecto.

Excelente peso manejo corte rápido sin esfuerzo las barras un poco indebles en el centro dificulta ra rotura de la plaketa

Handhabung und Schneideleistung ist sehr gut. Nur der Anschlag, passt nicht zum Gesamtbild. Die Winkelverstellung und die Position vom Anschlag verstellt selbständig, leider

I have been using this to install 60cmx60cm large format tiles during the last month. I had to struggle so much to get the laser pointing straight. It is not properly fitted when illuminating straight (what it is supposed to do). There is also a slight non-adjustable cut that results in non-straight cuts. When cutting 60cm tile, this leads to around 2mm error which is impossible to correct. I hope that Vevor will fix this design error as I read about this error before I bought it. I thought it could have been fixed by the time I bought it about 3 months ago. No, I was disappointed. Yet, for the price I paid, I still got my job done and I am happy with it. But, Vevor has to fix this issue.