Reseñas de clientes para VEVOR Cortador de Azulejos Ancho de Corte 35-1200mm Cortadora de Piso Laminado Espesor de Corte 6-15mm Cortador Manual de Azulejos de Aluminio Corte con Láser para Cortar Azulejo de Porcelana
1.2 m-Riel Si mple
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
1057 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Doesn't perform as described
1.2 m-Riel Si mple
Bought a 3 weeks ago , doesn't perform as described
0 personas encontraron esto útil
Traducir reseña a Español
Passable
1.2 m-Riel Si mple
Elle fait le travail mais sur du grand format genre 120x60 c’est plus que limite à rayer le carreau, l’axe a tendance à faire le ventre au milieu malheureusement.
J’avais pris ce modèle justement pour éviter la flexion des doubles rails, mais au final c’est pas vraiment mieux.
Ça coulisse mal, et le traçage via la molette n’est pas parfaitement droit.
Le laser est un petit plus mais il manque de puissance.
Il manque deux supports en plus de chaques côtés pour améliorer la stabilité
Il vaut mieux partir sur un autre modèle pour faire du bon boulot.
0 personas encontraron esto útil
Traducir reseña a Español
Ist in ordnung für den kleinen Geldbeutel
1.2 m-Riel Si mple
Nicht zu vergleichen mit Profigeräten von Sigma,Kaufmann usw Bruchvorrichtung könnte besser sein manche Fliesen lassen sich nicht brechen da die Leitschiene sich durchbiegt Stahl wäre besser als Aluminium für den Heimwerker reicht es aber aus.
0 personas encontraron esto útil
Traducir reseña a Español
Renforcer le barre en mettant doubles tube inox comme les autres
1.2 m-Riel Si mple
Appareil lui même très bien mais la barre supérieure est trop souple
0 personas encontraron esto útil
Traducir reseña a Español
Not assembled correctly
1.2 m-Riel Si mple
Came partially assembled one of the side support legs wasn't installed and in order to install it needs to be disassembled , bearings not one was spinning freely because the washers were installed at the front of the spacers onto the bearings and that was stopping them from spinning so again need to be switched around so basically complete disassemble to fix this issues then the laser is not 4 screw adjustable only two and is impossible to align it if the back aligned to the cutting wheel then the front at least 1/8" off if the front aligned then 1.5 " at the back is off I tried for an hour and not possible to align it , the breaker shoe doesn't have a magnet to hold it up when you score so it's a bit annoying, I am disappointed!
0 personas encontraron esto útil
Traducir reseña a Español
War soweit okay obwohl Verpackung beschädigt
1.2 m-Rieles Dobles
Sehr schnelle gute Lieferung produktkarton war beschädigt gerät aber in Ordnung
0 personas encontraron esto útil
Traducir reseña a Español
Drugi raz bym nie kupił
1.2 m-Riel Si mple
maszynka duża masywna z podpprkami to na plus.
podstawa dziwnie się wygina tak nie naturalnie.
Cięzko ustawić laser.
Cięzko wyczuć z jaka siłą naciskac na ramie.
Za lekko płytka się krzywo złamie. Jak zamocno to tnie krzywo.
Drugi raz bym nie kupił
Byc może nie umiem tego obsugiwać. ;)
0 personas encontraron esto útil
Traducir reseña a Español
Herr
1.2 m-Riel Si mple
Ich habe das Produkt gekauft um Fliesen im Format 20x120 zu schneiden.
Das Gerät ist recht simpel in der Nutzung. Leider ist die Qualität nicht sonderlich gut.
Der Anschlag ist etwas schräg montiert, sodass die Fliese nicht rechtwinklig angelegt werden kann. Der Laser lässt sich ebenfalls nur bedingt einstellen, sodass er entweder am Endanschlag oder am Anfang die Schnittstelle markiert.
Zudem ist die Führungsschiene etwas schwach bemessen, sodass sich beim Anreißen in der Mitte der Fliese die Führung hochdrückt und der Riss nicht sauber ist.
Für den angebotenen Preis im Bereich Hobby Gerät ist es okay.
Der Support zu den angegebenen Problemen war leider sehr schlecht. Mir wurde 3x die Anleitung des Produktes geschickt, statt auf die Probleme einzugehen
0 personas encontraron esto útil
Traducir reseña a Español
Plus rapide
1.2 m-Rieles Dobles
Bien reçu merci
0 personas encontraron esto útil
Traducir reseña a Español
Not for professional use but great for a DIY project
1 m-Riel Si mple
This tile cutter is impressive for the money and cuts smooth however, I’m a pro tile installer and there’s a couple of things which don’t make this tool for professional use
-needs adjustment in order to cut straight which isn’t easy
-very difficult to see where your cut will be as the head of the wheel cutter blocks the workpiece view
-laser is not visible on glossy tile
I’ll use this cutter for a spare if needed
0 personas encontraron esto útil
Traducir reseña a Español