Reseñas de clientes para Fundidor de cera VEVOR para fabricación de velas, olla eléctrica grande de 6,5 litros con pico vertedor fácil, control de temperatura de 9 niveles, fácil de limpiar para velas, jabón, cremas, belleza, producción a granel, negocios o hogar.

Difficile de faire couler la cire. Il faut le mettre au maximum de chaleur. Quelque fois ça fonctionne bien, quelque fois ne fonctionne pas

I like the size but can there be a stainless steel version? Also the screens on the handle keeps falling off. It seems they’re too small.

Have not been able to use, because the lid does not match the pot, and customer service has not been help

Fuit au bout de 1 ans . vraiment déçu.

This wax melter even though advertised for beeswax, absolutely does not work for it, it clogged the spout immediately and I had to pour the wax back out of the top, super disappointing. I have the smaller 5L melter which has been amazing, I thought this product would be just as good, but it’s garbage. It would probably work best for coffee or tea at a brunch bar.

slechte kwaliteit, klacht neergelegd bij het support team van Vevor maar ik wordt totaal niet serieus genomen en krijg continu dezelfde standaard antwoorden terug. de pan is niet goed, wordt veel warmer dan de instelling en het kraantje werkt ook niet naar behoren. Ik koop hier nooit meer wat puur om de slechte klantenservice want niemand komt mij tegemoet met een oplossing dus ik pak mijn verlies wel. Ik zou deze iedereen afraden. Ondanks dat wij ook heel veel bestellen met ons andere bedrijf zullen wij ook vanaf daar niks meer bij Vevor bestellen.

DO NOT BUY THIS, NOT EVEN 6 MONTHS OLD AND IT NO LONGER WORKS, advice it has to much product in there?? it holds 10L so it should work fine for its capacity, Told to stir solid wax?? How in the heck do you stir solid wax?? THEIR TECHNICAL SUPPORT SENT THIS AS A REPLY: "As seen in the image, too much wax was melted in the bucket, and it was not completely drained before the wax solidified. This caused heat to accumulate at the bottom of the bucket, which may have burned out the heating element at the bottom. Additionally, the product must be stirred continuously during use; otherwise, the machine will enter standby mode as a protective measure due to overheating. The quickest solution right now is to use a small spatula to completely remove all the wax, unplug the unit for one hour, and then try restarting it."

Works great so far! Only suggestion is to make the pour spout much bigger. This unit is NOT really suitable for production because of the slow pour rate that it offers. It really needs to pour more volume... :(

Should have read the other reviews about the temperature. To save you some trouble as to decide whether you are willing to deal with all of this, and also to remind myself how to use this, I am including the instructions from Customer Support here: "There are the following precautions when using this product: This is because of the characteristics of wax after melting, and the temperature will quickly increase after the wax is completely melted. Therefore, we recommend setting the temperature to about 10 ℃ higher than the melting point of the wax, and then stirring continuously during the melting process, so that the temperature will be relatively stable; The temperature of this machine may have a positive or negative error, so it is best to measure it with another thermometer. Cooling should be done by pouring out the container and not placing it in a bucket, as the residual temperature after heating inside the bucket does not dissipate so quickly."

I purchased a VEVOR wax melter. It’s easy to use. Quality it okay. But what’s disappointing is that it didn’t come with the screws and nuts for the arms. I asked customer service if they could send me my missing items (parts) and they never did. I’m not sure why they made a big deal about it., So my husband went to the store and purchased my screws And nuts that I needed to finish with assembly.