Reseñas de clientes para Elevador de vehículos VEVOR, portátil, con capacidad de 3177 kg, con placas extendidas y altura máxima de 68 cm, de acero al carbono de alta resistencia con motor de 120 V, ideal para garajes, talleres y hogares.

This lift is heavier built than I originally thought. Getting it out of the crate was simple. It was very well packaged. I had to lubricate inside the rails, where the guides slide. It was a little tight at first. After lubrication, I raised my car up down several times. This allowed me to purge the air out of the hydraulic system. This also loosened the lift up. It takes almost 1 gal. of no. 46 hydraulic oil. When it was time to break it down, it was a breeze. However, each lift is kinda heavy to hang on a wall by yourself. I'm just going to stand them up against the wall and strap them. Still, this is a great lift. It'll be used a lot.

I bought this lift about a year ago. It came with damage on the ends. The crate that the lift came in was fine, no visible damage. Also, the controller housing for the hydraulics was cracked. In addition, some of the bolts and nuts that hold the electrical motor were all lose. I was in contact with the Vevor through text chat with two different chat persons, I took pictures and sent them as they requested, then was going back and forth trying to resolve the issues. I finally got fed up and just decided to deal with it, instead of going through all the hassle. I straighten out the end as best I could and epoxied the controller housing. Then I tighten all the lose nuts and bolts on the electrical part of the hydraulic pump. Seems to me though I could be wrong, this might have been a return Item that I had gotten sent to me. Anyways other than that everything worked and is still operational. I was disappointed that it did come with some damage.

Mostly meets my expectations. The lift is very heavy to move, so I had to build my own front wheeled dolly to move it across the shop floor. Standing these things up on end to try and wall hang them is almost impossible without inducing a hernia. They pretty much need to be left on the shop floor, where they do take up a lot of space. The extension pieces provided don't fit properly - one of them won't sit down flush because the manufacturing tolerance of the welds isn't great. Safety chocks don't always want to engage as the lift rises, requiring me to use manual jack stands to ensure safety. Would I buy these again? Maybe. I believe other more common brands might be better built.

Works well and heavy duty. But also heavy to move around and I’m no wimp.

I had previously purchased a 7,000 lbs car lift from Vevor and never received it. So this is my Second Attempt so hopefully it goes better this.

Ya no funciona mi elevador apenas e usado como tres veces ya no levanta necesito que alguien me ayude por favor

I bought this system because it was considerably less expensive than the Quick Jack system and looked to be built pretty well. It is definitely built sturdy. The lift platforms probably weigh at least 150 lbs a piece. Considerably more than the Quick Jack lifts. Forget hanging them on the wall. I am disappointed in the lifting capacity. My 2023 Charger Scat Pack Widebody probably weighs about 4400 lbs. The Vevor 7000 lift should easily lift my car to the second locking slots. It barely makes past the first slot. Even at that it provides enough room to get done most things I would want to accomplish.

Purchased this item to lift my new Miata convertible, but the wheel base on the car was too short. I had to sell it at a loss

The unit is leaking , I am very disappointed

I wish I could say how much I'm enjoying it but since buying it a month ago I still haven't been able to use it. I bought the extended version due to the length of my cars but 1 of the extensions arrived bent and unable to lay flat making the lift unusable. I reported it and sadly that process was painful and frustrating. I received several notices that my composing was resolved and would be closed when the previous response was that I should wait 48 hrs for a resolution. Several times I was assured I'd be contacted in a certain time frame only for that time frame to lapse forcing me to follow up on my follow ups. On 1 occasion weekend I actually did get a response they told me to bend it back. That's was laughable fire several reasons not to mention that if the metal could be bent they easily or successfully what would that mean for supporting the weight of my car. That said her I am a month late several back and forths and my replacement extension that I had to fight for is supposed to be arriving today. So hopefully then I'll get to use it and see if I like it