Reseñas de clientes para Elevador magnético VEVOR, capacidad de tracción de 660 lb/300 kg, factor de seguridad de 2,5, neodimio y acero, imán de elevación con liberación, imanes de elevación permanentes, imán resistente para polipastos, grúas de taller, bloques, tableros

I don’t think this is capable of lifting the advertised weight. If it can, then I must be using it wrong. I tried several times to lift a plate vertically, and each time the magnet would slide off. The plate is approximately 400lbs. I also tried to lift the plate flat, and it would hold for a moment then let go. To be fair the metal I am lifting has surface rust so perhaps the metal needs to be clean first. I respect its boundaries and it works well when I do that.

Om eerlijk te zijn vertrouw ik deze magneet niet. Het metaal MOET 100% PROPER zijn anders werkt het niet betrouwbaar. Ik wou ze gebruiken om metaal platen van 2 vierkante meter 10mm dik op mijn cnc te plaatsen. Nu gebruik ik de magneet om rest plaat van de cnc te halen, geen volle plaat. Bij 5mm plaat ben ik geruster qua draagkracht. 2mm werkt niet echt goed, plaat buigt teveel door waardoor de magneet faalt. Dus 600 kg kan deze volgens mij niet dragen. Jammer wel, had er meer van verwacht.

I bought this for my small metal working shop to help me move thin gauge sheet steel. I won’t hold anywhere near the stated capacity. It can’t even hold a single sheet of 16ga steel which is around 80lb. I’ve cleaned the magnetic surfaces and wiped down the steel surface too. It consistently drops the sheet every time. There is probably a disclaimer somewhere or some highly limited test protocol used VEVOR can fall back on to say the rating is okay/correct, but for regular every shop purposes, the max is probably around 75lbs in real life.

Acheté pour lever du bac acier il ne fonctionne pas. Très déçu

This is the worst product i have ordered from Vevor. I have ordered many different products and most are good, but this one was a total waste of money. It simply doesn't work well, and is hard to use. Would never buy this again or recommend it to anyone.

Lucky to lift 9kg definitely not 90kg bought it for lifting individual sheets of colourbond but it’s to week to even do that..

This item came damaged, went through the Vevor help center and they are a joke to be modest. I was told to take a hammer and beat on the item to make it better. It was smashed in on one side, the operation handle was bent and the keeper is broken. How is taking a hammer to it going to make anything better? What a joke this company is. All would be good if they would just replace the damaged item, but no, they have no interest in repeat customers. Well, eventually they will run out of people willing to purchase from them.

Biggest piece of junk I have ever bought and trying to get it refunded and return is aweful this is the second one and it was junk line the first I don’t not recommend this product to nobody

Die Ware ist bis heute noch nicht angekommen

Does not provide 600kg of lifting force as advertised. Would not hold onto a 20' x 2" x 1/4" square steel pipe weighing less than 200kg. Magnet does turn on/off with switch Magnet does have a safety. But is drastically overrated. Working load with the 600kg modle is less than 100kg! It will be returned!