Reseñas de clientes para Roscadora de tubos eléctrica VEVOR de 2300 W con 6 matrices de 1/2"-2", roscadora de tubos manual de 110 V con motor de cobre, kit portátil con estuche de transporte.

Havent used it but was disapointed that the dies do not fit a Ridgid or Ridgid do not fit this electric threader..

No replacement dies from Vevor available! The threading machine is heavy duty and well made for price. Unfortunately the dies that come with it are crap (made from aluminum holder). When cutting my first 1-1/4" thread the cuttings gouged the inside of the aluminum die holder causing it to bind on the pipe. I also broke some of the teeth on the die. Contacted Vevnor and they don't sell replacement dies (Duh!) Fortunately I found on amazon a replacement die from (HFS (R) Pipe Threading Tool Ratchet Pipe Threader Dies). The Die cost was 21.99 and fits the Vevor electric threader. Most import is this replacement unit is a cast steel die holder - much more durable then aluminum. I cut 6 threads easily without any difficulties.

Works good and gets job done. Don’t over oil the shavings will get jammed inside die. With couple of drops of oil will do a professional thread. Definitely beats hand threading

Das Gerät tut was es soll Preis-Leistung finde ich persönlich vollkommen okay... Lieferung erfolgt der zeitnah.

EVASIONE ORDINE REGOLARE, UTENSILE DI DISCRETA QUALITA' OVVIAMENTE NEI LIMITI DI PRODOTTI CINESI CONSIGLIATO-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Used this to thread gas pipe from 1 1/2" down to 1/2" pipe. The smaller pipe cut the threads good , but the 1 1/2" ,1 /14" ,and the 1" pipe threads had trouble half way thru chewing up the center thread and I even made sure we used enough dark pipe thread oil.sometimes I would put it in reverse for a few threads then forward again to finish up the cut.

Το εργαλειο το αγορασα σαν δευτερο,το πρωτο ειναι REMS. Το δουλεψα σε 3/4 και 1 ιντσα,οι φιλιερες που εχει εινα απλα για πεταμα,εβαλα αλλες και δουλεψα. Το δευτερο ειναι οτι αρχισε να χανει λαδι μεσα απο το σημειο που κουμπωνει η φιλιερα,και οι φιλερες απλα φευγουν απο την θεση τους και ξεκουμπωνουν. Το τριτο ειναι οτι ειναι θορυβωδες,και εχει ιδια ταχυτητα και οταν κοβεις βολτες,αλλα και οταν ξεβιδωνεις την φιλιερα. Με λιγα λογια το μηχανημα ειναι απλα για μικρα σπειρωματα,δεν νομιζω να μπορεσει καποιος να παει σε μεγαλυτερο απο 1 ιντσα. Ειναι ενα μηχανημα απλα να το εχετε για ωρα αναγκης,δεν κανει για δουλεια,για τα λεφτα που εδωσα,ειναι οκ,μην περιμενετε να βγαλετε μετρα,θα σας μεινει στο χερι. Παρτε ενα επαγγελματικο και αυτο σαν back up.

From the first cut it tears threads really bad, have had nothing but issues, wound up renting an expensive one. First encounter I have had with anything vevor performing sub expectation.

Do not buy. My threader did not turn on at all, and now a month later I’m still trying to get a refund. They try everything to not refund you.

unfortunately VEVOR has let me down, I’m unable to review this product as I never received it, they took my money, promised a delivery date and didn’t deliver, I will never purchase another item from VEVOR again, you’ve lost a customer. Poor business model, over promise and under deliver.