Reseñas de clientes para Roscadora de tubos eléctrica VEVOR de 2300 W con 6 matrices de 1/2"-2", roscadora de tubos manual de 110 V con motor de cobre, kit portátil con estuche de transporte.

To my disappointment, the machine tripped every circuit-breaker. after inspection it became clear that the seats of both carbon brushes weren't perpendicular to the commutator. Because they are (probably) inserted in the injection-mold process, they weren't able to be turned or twisted. therefor i had to manually sand off some of the brushes (which were luckily too big for the distance of the commutators contact points). After that it functioned without tripping the circuit breakers. If you don't want to fiddle around with the mechanics, you should invest in a more expensive threading machine.

We purchased that threader for purpose of very occasional 6/4" and 2" threading. Forget it. For these sizes, the machine is totally useless; it overheats immediately. But we should have guessed, given the extremely low price.

We attempted to thread 1" and 2" Rigid Aluminum conduit and the unit could only make a 540 degree revolution before it stopped rotating . We reversed it slightly, cleaned the metal cuttings away. We returned to cutting and it would not pass the first stopping point. The gear box was quite warm. We had to revert to our Rigid hand threader to complete the job which cut quickly and without fail. We threaded the 1" but never pulled the trigger, we had to use it like a regular hand threader because the same issue of no power as we experienced with the 2" pipe. We had to return to our shop and get our old hand threaders . Very disappointed about this purchase. The power operated threader was purchased to speed the job up , instead we lost several hours . I would not recommend this unit to anyone, the excellent price point was what caught my eye, it did not pass the test in my company. No image or video to upload.

Foarte slaba calitativ,s-a stricat în prima zi de utilizare

El producto cumple con lo que promete, pero en las medidas grandes (1 1/2 y 2") le falta potencia y la máquina se calienta

I bought this machine for treading, but it doesn't work od bigger diameter , it's stopping, doesn't have enough power for bigger diameters, but, for smaller ones there is no problem

Not a bad product you get what you pay for. it's kind of finicky to learn how to use, but overall worthwhile.

The machine works fine, but the threaders don't cut proper threads

motore filiera ottimi , le matrici sono veramente scarse , ho dovuo sostituire e matrici con le matrici quelle di quella mia vecchia che in 20 anni non ha sbagliato un filetto ,per ora ho effettuato circa 100 filetti da 1-1/4 e 30 da 2 ,il motore resite

1st pipe cut the die failed and the cheap pipe holder broke. Had to rent a rigid to get the job done. Absolutel junk