Reseñas de clientes para VEVOR Carro de Combustible Tanque de Almacenamiento de Gasolina de 35 Galones con 4 Ruedas Bomba de Transferencia Manual para Automóviles, Cortadoras de Césped, Vehículos Todo Terreno, Barco, Negro

33 days later and this item never arrived. A Fed Ex label was created but no items were ever shipped. (NOTE: I also ordered a 35-gallon gasoline tank along with this item which did arrive on time.) It is now 33 days since VEVOR took my money for this item. I have disputed the charge with my credit card company which has issued me a provisional credit while they investigate it.

My Caddy came to me with the red rod for the pump bent and unusable. I have not been able to get help with this matter Please call me at (707) 954-8198

Pump is junk

While assembling, I sheared 1 bolt and nearly sheared another with a wrench. Very little pressure

I really like everything about this caddy except the low quality plastic cap. Not tightening the cap enough leads to leakage when tilting the caddy to move it. Unfortunately the threads easily strip if over tightening, which happened to me with my second fill up. Another issue is the paint began peeling on the handle after about a month, not ideal, but it's just the handle. The paint on the tank seems to be holding up.

I haven’t had a chance to use it yet, but I did open the shipping box and noticed several issues right away. The tank has a large gouge in it—I’m not sure if it goes all the way through—and the pump casing is cracked. The entire unit was also scratched up. I’m not sure if it even works yet, but I’ll provide more details after I’ve had a chance to test it.

The portable nature of the tank is useful. The casters are not great quality, the tack welds holding the fixed nuts on the bottom are not the best. The casters need washers to create enough clearance to swivel. The pump itself works, but the flow design is flawed. The hose is merely clamped to the top of the port and bends easily, crimping and occluding the flow. A 90° fitting for the top is suitable to solve this. The pressure does built in the tank in heat and if all fittings aren’t super snug, they will leak/release gas. Another feature that should be added is a storage system for the hose and spout. I zip tied a gallon jug to the handle to create a nozzle storage. The flow of the pump is bidirectional and pretty good. It doesn’t require excessive force or revolutions to operate. Larger casters with better clearance, longer handle, better flow fitting on pump, and storage solution for the spout.

White metal crank broke off the 5th or 6th time I used it. Worked well before that, but cheap white metal crank was poor quality & likely had an imperfection or slightly damaged in transit creating a weak point.

ok serves my use

Plastic cover on pump broke and the treaded nipple that was sent was wrong treads