Reseñas de clientes para VEVOR Gancho de garra para madera, 28 pulgadas, 4 garras para pinzas de registro, pinzas giratorias de elevación de troncos de acero, diseño de garras de águila con capacidad de carga de 2205 lbs/1000

Nice item, very heavy duty, but also Very heavy. Worth the money. Some assembly required. But not bad.

Bought and these to load firewood logs into trailers with my utility tractor. They work quite well. Took a little practice to get the logs in the middle or right balance point. Loaded some pretty heavy logs and they heldup fine. Good product for the price.

I haven't used it yet. But it looks like it's made fairly well and it should do what I wanted to do.

Works good only thing so far is bolt holding loop and hook seems to be separating think that is the only weak spot so far

Hooked up to a boom and used it to move some fallen trees, but the claws don't work well with smaller trees since the points are at the wrong angle. The newer ones with serrations may have been a better fit for my needs, but I thought the bar stock would hold up better than the flat steel.

Had to bend the pinchpoints to get to work, however works great

I previously had two single grapples which I affixed to the ends of my front end loader bucket. I lost one of the grapples, and couldn’t find the same size, so this looked like a reasonable replacement. However, it is not well designed—it pivots, so trying to use the grapple to create a deck of logs for my mill it’s hard to get the logs parallel to add to the deck. Also, having two grapples so close together is a head scratcher—it basically can’t do anything a single grapple can. After buying a bunch of additional hardware I was able to create an effective extension of about a foot, which helps some but is far inferior to the 60” bucket grapple-at-each-end system in terms of log control. The extra hardware cost almost as much as the grapple. Then I found my lost single grapple, so this thing has gone to the back of my shop and probably won’t get used again.

It works ok sometimes you have to get out of tractor and place the claws in position cause it exactly won’t get in place but overall ok oh assembly was difficult cause their direction s we’re not very well.

Not sure if I got a used one. But from what I see someone has used this and returned it.