Reseñas de clientes para VEVOR Gancho de garra para madera, 28 pulgadas, 4 garras para pinzas de registro, pinzas giratorias de elevación de troncos de acero, diseño de garras de águila con capacidad de carga de 2205 lbs/1000

Works well for about 10 large logs,then starts to get twisted and be less and less usable, I had to buy 2x of these to move 100x logs and both are complete wrecked

Not as big as I anticipated ? You would think 18 inches would be the the size of the claw,they are very small.

Struggles to grab almost every rock i have attempted to move. Of 6 rocks (outcropping) I have attempted to place, only 2 have been successfully picked up by this tool. It works fine on small trees, and rocks small enough you can move by hand beside 1 foot diameter, but anything larger at struggles to grab with 1 person controlling the hook and a 2nd in the machine. Absolute garbage.

Item never turned up, spent two weeks chasing it around the country only for it to get sent back and leave me with no item. I did get my money back!!

This thing is useless

Junk already broke

Works good only thing so far is bolt holding loop and hook seems to be separating think that is the only weak spot so far

Had to bend the pinchpoints to get to work, however works great

I previously had two single grapples which I affixed to the ends of my front end loader bucket. I lost one of the grapples, and couldn’t find the same size, so this looked like a reasonable replacement. However, it is not well designed—it pivots, so trying to use the grapple to create a deck of logs for my mill it’s hard to get the logs parallel to add to the deck. Also, having two grapples so close together is a head scratcher—it basically can’t do anything a single grapple can. After buying a bunch of additional hardware I was able to create an effective extension of about a foot, which helps some but is far inferior to the 60” bucket grapple-at-each-end system in terms of log control. The extra hardware cost almost as much as the grapple. Then I found my lost single grapple, so this thing has gone to the back of my shop and probably won’t get used again.

It works ok sometimes you have to get out of tractor and place the claws in position cause it exactly won’t get in place but overall ok oh assembly was difficult cause their direction s we’re not very well.