Reseñas de clientes para VEVOR Gato de Transmisión Hidráulico 0,5T Elevador Carretilla de 2 Etapas Bomba Hidráulica de Pie de Elevación 85 x 65 x 85 cm Gatos Estabilizadores Azul Gatos Estabilizadores para Elevar Vehículos

I can’t complain much for the price, but it slowly bleeds pressure off and drops the transmission down slowly, which isn’t good when you’re trying to get a transmission in or out. I’ve had it less than a year.

This looks ideal initially, and with a great price. In reality, its underbuilt, the table it is very floppy, too small, and it doesn't even come close to lifting high enough. Thats the biggest issue. If youre going to use this on a regular car lift, you need a transmission jack that goes up a MINIMUM of 12" higher than these do. If you're only going to use a couple of times, its probably worth it. If you want to use it in an actual shop, get a real jack that goes high enough.

I read the comments and did some research. Overall the price is great but Jack does not go high enough and I’m not a tall guy. Going to have to build an extension. The plate works well with an automatic transmission but I will have to fabricate something for standard Transmissions. As the cradle legs are lightweight. Would recommend as far as price as it works well overall.

I used it 2x and on the second time it busted a seal where the shaft moves up and down. VEVOR sent me another one out and I haven’t tried it yet but hopefully it holds up better than the other one!

Assembly was easy even though directions are a little sloppy. The foot pedal operation need improvements. the swivel bed is so-so when I had a 4l60 on the plate. My biggest tiff is the open / close vavle location is in a peculiar location and theyre needs to be improvements o the open/close vavle for precise adjustments

Received this jack with one of the orifices leaking, set screw is tight. I assembled anyway thinking maybe it was just residual from manufacturing and shipping. Overnight it left a huge pool of oil on the floor. I contacted customer support and was told I would get a response within 48 hours.....it's been a week and have not been contacted, even after sending 2nd email. Do yourself a favor and don't buy tools directly from Vevor.....there is NO Service after the sale. They got your money, now you're on your own.

Overall this thing works as intended. The build quality or the ram and legs is good however everything else is lacking. The foot peddle has a bunch of play while jacking it up The platform rocks on top of the jack and I will be welding mine in place. The castors barely roll with anything on it, and the securing chain/anchor is junk. Just use a ratchet strap Instead. In all this will work as intended but you do suffer a bit for buying one so cheap.

Wheel are terrible they don't sweval all the way around the locks are to big and the top i stead of straight up and down there angled but can deal with just really need to change the wheels out make it hard moving around

The top needs to be made a 1/4 turn different. And the table needs to angle 2 ways not 1 .

First and foremost the hardware is cheap and cheesy. Secondly the casters are absolutely trash-order good 1k casters when you order the jack, you’ll thank me later. Table is ok’ish side to side is useless and the tilt is super sloppy,and yes they used the same cheesy hardware for the tilt and side to side adjustments. The jack itself works but the ergonomics are more suited for people in the five foot tall range. But it does work-I would hate to use it daily to R&R tranny’s especially if I’m working flat rate commission lol