Reseñas de clientes para VEVOR Gem Faceting Machine 180W Jade Grinding Machine Pulidora 3000RPM Rock Pulidora Jewel Angle Pulidora con manipulador facetado Luz LED y bomba de agua Amoladora plana para pulidora de joyas (110V)

I just joined a Gem and Rock Club, and learned how to use a different machine. I bought this "cheapy" to use at home and so far: AWESOME! The 0.05mm Mast marking and adjust is great. The Speed adjust, water supply, and machine seem pretty solid (I did have to put the control board together as it was damaged in shipping, but it was just "loose"). I bought 320, 600, and 2k lap disks because I'm starting on Quartz (1k is really slow). It doesn't have a "cheater", but it does have a hard stop. Like the previous reviews, fine (0.1 or 0.01 degree) angles are not really possible (without a great eye). Honestly, from what I can tell, that is part of the art of it anyway. Quite pleased with my first quartz stone finished at 2000 grit (will get 3k anyway, for ruby). Removable plug for 90 degree girdle grinding is great, as is the 30 degree dob holder for doing the perpendicular table cut (at 60 degrees on the mast). Water adjuster could be finer (is pretty hard to get drops instead of stream). For the price: 1000% satisfied. I don't know what more a $3000 machine would do (besides the fine angle control).

Absolutely perfect for sanding and shaping stones. Bought extra grinding wheels with. Had to make a container for water hose because it has none. Keep that in mind when purchasing.

I bought this very affordable faceting machine, and I am impressed with the quality. It preformed an orthoclase feldspar in under an hour, but I have to get more laps to finish it. I am new to this hobby, and this machine makes it seem like we are off to a great start together. I hope to use it for years to come.

Venditore ok, spedizione veloce, macchinario ben fatto e ben calibrato, consiglio

Machine needs to be looked over to be level and plumb, bolts and screws should be tightened and situated to ensure proper cuts. Other than that its a good tool to start!

Face ce scrie pe cutie

Macchina bella e ben costruita, pesante e completa di disco diamantato P600. Solito imballo impeccabile

Never used still in the box

super rapide

I am using this machine to cab glass. I am enjoying it to a point. I also am using my hands to do this, not all the angled holders and such. Today, I used it for my third or fourth time. These are my issues: During set up 1. A few things were not mentioned in set up procedures and I had to source several different similar machines to see how the water spigot and pump should be set up. They were not described nor displayed. 2. The hoses wouldn’t fit well and I could not do the clamps up tight enough myself so I had to get help. 3. The plastic clamp tighteners feel flimsy **Now, a short time of use. 4. The clamping bands are not stainless so they rust into the water surrounding the pump and the pump might get ruined by this. ** 5. The water dripper handle might be great for small handed lefties (small area and weirdly angled?) but I have small hands and find it awkward. 6 I am having to adjust the water a lot. It seems to run on too slow a drip or too much. 7. The hose coming in is never fully filled but does operate. The one coming out of the machine arrived bent flat at the machine and I have had to add some gravity to assure drainage. It works.