Reseñas de clientes para VEVOR Bidón de Combustible Portátil Capacidad de 20 L, Bidón de Combustible con Sistema de Pico Flexible de Acero Inoxidable y Resistente al Calor, para Coches, Camiones y Equipos, Color Rojo

The cans themselves are ok I suppose, but the mouths, spouts and closure mechanisms are poorly done making it difficult to seal and pour. The spouts leak and drip at the "seal" point. The lock pin holes were not drilled correctly on some of the cans. And some of the locking latches were welded on lopsided at about 2-o'clock. Overall, they are cheap, low-grade jerry cans. And they are not compatible with any other spout I can find. If you get these to use in a vehicle out on the road, you may want to bring a funnel.

A little disappointed. I like its durability but I had hoped the battery powered gas pump would fit into the opening once the nozzle was removed. I’m 68 years old and lifting a 5 gallon gas can full of fuel is beyond my capability. The pump won’t fit as the opening isn’t wide enough. I will probably advertise it on Facebook Marketplace to see if I can recoup some of my money. And I will keep looking.

Received two of these cans, seemed well made. Unfortunately, only one had its bottom indented so it would stand up straight. One is flat with a prominent ridge and it tips over while sitting on the shelf. The "chat" service was useless other than to say your concern has been logged, have a good day, Bye. Simply frustrating.

Jerry can was rusted inside, no way to put fuel in. Pictures attached. Avoid at any cost.

Has been in my truck just a few days before it started to rust.

Bad bait and switch scam, not as pictured. Asked to return, got massive runaround. SCAM! BAIT AND SWITCH SCAM REPORTED TO BBB.

Please see embedded: Main steam flow was directed to the blue tub. Smaller puddle next to the pan was dripped from the goose-neck-2-gaset-2canister joints. Paddle is smaller, but was enough to ruin my expensive pants :-(, as I was holding the canister in my hands. Redesign recommendation: 1. Thicker and lower durometer gasket; 2. Make sure that Chinese durometer standards are not the same as in USA. 3. Make sure that your gasket thickness is taking into account rubber creep/set with time. It should be also gasoline compatible (see gasket material compatibility with gasoline). 4. I can help you with the redesign if you are interested. Otherwise, excluding you locking pin, I would keep the product. However, you defects are not making it possible. Regards, Alex Yatskov P.E. PS: Hope you will address the issue promptly. Alternately that picture would beg to be on your web site.

Unfortunately, this can leaks so bad right out of the box, that we couldn't use it to fill our boat. We double checked everything multiple times, and I have decades of experience with gas cans and dozens of vehicles of all types. The pour spout leaks badly every time, sadly.

Expected the durability and function of a jerry can. The pour spout leaks a small drip some times and then pours out others. Tried readjusting the seal and still leaks the same way.

They had these two cans for around 6 months and I noticed in the winter time when it's cool they're like to suck in and then when it's warm they like balloon out and one of them cracked right down the middle just a little hole but is leak all the time damn.