Reseñas de clientes para Mini línea divisoria VEVOR de 7,6 m (25 pies), con tubos de cobre de 6,35 mm y 9,5 mm de diámetro exterior y aislamiento de triple capa, para equipos de aire acondicionado, bombas de calefacción y HVAC, con accesorios (cable de conexión de 8,2 m)

The 1/4" inch line was just a bit to small in diameter. I was not able to re-flare in my flaring tool. I had to wrap the 1/4" copper line with some sand paper so the flaring tool would work

Muy buena calidad trae todo lo que está descrito en las fotos con sus masillas su porta tubo para el hueco y cable de electricidad cinta para los tubos sus aislantes todo muy bien la verdad muy satisfecho

Used to install an 18000 btu split a/c. It was exactly what I needed, easy to bend without kinking. I would've given 5 stars for the product but the shipping estimate was way off and came much later than expected.

Kit is almost perfect missing some 3 feets for the wire cable it is not suppose to be the same lenth of the cupper it shoud be longer and also the water hose it is useless

This hose kit will NOT fit the 18,000 btu unit. The fittings are too large. Buy one size smaller I will be returning this purchase.

Overall, the quality of the copper seems decent. One of the caps on the 1/4" line was loose in the box. I made the mistake of not opening the box when it arrived. I waited until I received my new Mini Split. Unfortunately the communication wire is only 16 guage wire so I was not able to use it. I would not recommend this Lineset unless you were installing a 9000btu 120V system. I would be hesitant to even use the wire in that situation. Come on Vevor, upgrade to the wire to 14 guage.

Very poor 1/2" copper pipe, the wall thickness is far too thin, which makes the product prone to buckling.