Reseñas de clientes para VEVOR Kit de plantilla para orificios de bolsillo de 30 piezas, sistema de plantilla para orificios de bolsillo ajustable y fácil de usar con taladros escalonados, anillos de tope de taladro, llaves y puntas cuadradas, marcas de escala dual para proyectos de carpintería de bricolaje

Good price

Haven't used the clamp it came with yet, but using it with a normal clamp on a 2 by 10 worked really well (even tho it stretches the limit of its reach). Seems good quality that will last. Wouldn't really say it is a 30part jig though. They count all the screws and shenanigans as well. 12 part would be more honest...

It works great. Have to be careful about drill bit depth

It is a alright jig haven’t had any problems with it keep thinking it is going to break,but it seems to hold up!

Excellent unit, easy to set up. Would have benn nice yo have more and/different size screws and some wood plugs. Recommended.

bon matériel avec une bonne ergonomie facile a l'utilisation et mise en œuvre rapide a voir dans le temps sa durabilité

Zunächst etwas gewöhnungsbedürftig - dies dürfte sich mit der Zeit und mit mehr Übung allerdings geben.

After a 100+ pocket holes, the structure of the tool has given out a bit, and drill bit kinda dull, probably because to the wobble and drilling of the aluminum from the wall of the tool and at the bottom. Bottom would need extra space 1mm for the end of the drill bit. - still great for the price, necessary for a+40mm thick material, but next one will be KPHJ720PRO-INT if I ever get next one. Organizer should be designed to hold the jig assembled, now need to disassemble and makes the use of the case irrelevant.

Drilled about 200 pocketholes with this so far. Been good! Drill quality is okay for the price. The jig clamps in place fine. The balancing rods are nice for stability. The only downside is the need for intermittent cleaning as the relief cutouts get jammed easily with wood chips. Could be an issue with the type of wood I have been using (spruce) or the way I'm bashing the drill into the jig (patience). Eitherway, buy it, use it and enjoy the pocket holes!

Although there are slots for the cuttings to disperse, they still seem to get clogs and have to be cleaned each time I use it. I am using birch plywood, It may be fine with particle board or MDF.