Reseñas de clientes para Kit de crimpado de accesorios para tubos de cobre VEVOR, herramienta de crimpado giratoria de 360° con mordazas de cambio rápido de 1/2", 3/4" y 1", pasador de bloqueo y mango extensible, cumple con las normas ASTM B88 y B75.

Manual pro press tool is great! For around a 100 bucks. it's a great deal and quick to work with. Makes no fuss about 1/2-1" pro press fittings.

Made easy work of a water softener and water heater swap for a friend where I didn't want to convert to PEX and knew I would be contending with no easy way to drain the house. Crimps are as tight and precise as automatic crimps. Just know you'll need patience and muscle. Hot tip: the jaws swing is too big for some tight spaces. Pull the pin opposite of the clasp and use it as a two part jaw.

Accomplishes the job of a powered crimper at a small fraction of the price. Solid materials, smooth operation.

Works great for having a press tool on a budget but it can be difficult in some tight areas. Usually need 2 feet of space to pull off the press properly Well worth it for the amount you save in comparison to a battery operated one.

Works. More effort than a power one but to be expected

Tiol is goob but requiere good effort to pushing. Only work open areas, is hard and difficult to crimped in refuce spaces. Not easy to use

Works good but is difficult in tight spaces but I only use it a few times a year so it's better than paying a lot for the battery crimper

Well made but very heavy and difficult to use with precision, especially in hard places. If you do not have thousands of dollars to spend on a lighter, motor driven, battery operated one: this will do the job. Just going to take longer, cost more in fittings you screw up and sore body from using it for long periods. Worth it if you gotta do what ya gotta do!

Overall, this press tool does what it is advertised to do. However keep in mind that pressing fittings requires a not insignificant amount of strength from the user. I have done several 1/2" fittings with this tool and it has done well, however, even with these relatively small lines it took a considerable amount of strength. If you are buying this for anything bigger than 1/2" I would recommend spending a little more money to get one of the manual tools that is hydraulic.

The tool works great for most fittings. It is too thick to work on tee fittings.