Reseñas de clientes para Kit de crimpado de accesorios para tubos de cobre VEVOR, herramienta de crimpado giratoria de 360° con mordazas de cambio rápido de 1/2", 3/4" y 1", pasador de bloqueo y mango extensible, cumple con las normas ASTM B88 y B75.

Tiol is goob but requiere good effort to pushing. Only work open areas, is hard and difficult to crimped in refuce spaces. Not easy to use

Works good but is difficult in tight spaces but I only use it a few times a year so it's better than paying a lot for the battery crimper

Well made but very heavy and difficult to use with precision, especially in hard places. If you do not have thousands of dollars to spend on a lighter, motor driven, battery operated one: this will do the job. Just going to take longer, cost more in fittings you screw up and sore body from using it for long periods. Worth it if you gotta do what ya gotta do!

Overall, this press tool does what it is advertised to do. However keep in mind that pressing fittings requires a not insignificant amount of strength from the user. I have done several 1/2" fittings with this tool and it has done well, however, even with these relatively small lines it took a considerable amount of strength. If you are buying this for anything bigger than 1/2" I would recommend spending a little more money to get one of the manual tools that is hydraulic.

Hienoinen kysymysmerkki on nuo V-tyypin leuat. Jostain syystä tuntuu M-liittimet olevan valtavirtaa Suomessa. Ja Googletuksen tuloksena mainitaan, että V-liittimiä voidaan puristaa M-leuoilla, mutta M-liittimiä ei V-leuoilla. No, koepuristukset M-liittimillä vaikuttavat onnistuneilta ja näyttävät hyvältä. Myöskään 8 bar koeponnistuksessa ei vuotoa esiintynyt. Pihtien vaatima puristusvoima ei ole paha, kohtuu helpot käyttää.

e pena não ter as mandibulas de 25mm vem a de 26mm se não daria o máximo de pontuação de resto está tudo ok material de boa qualidade um pouco pesado

Cumple su función. Pude realizar un trabajo sencillo de fontanería de un baño.

Material robusto, acessórios muito práticos, a rotatividade é sem duvida, prática. o único e muito grande defeito e o peso, para trabalhar em certas posições, não facilita nada. Fora isso, recomendo na mesma, pois o alicate e acessórios são excelentes.

Très bonne sertisseuse essaie sur multicouche très solide et en bonne qualité, livrée avec trois ressorts pour cintrer sans difficulté, pour le PER je sais pas encore ce que ça donnera, on verra bien.

Voor deze prijs een bruikbaar gereedschap.Je moet wel sterk zijn om TH26 te kunnen persen. Misschien na oefening dat het beter gaat.Het enige lastige is dat bij veel kracht zetten de uitschuifbare handvaten de neiging hebben in te schuiven. Volgende keer overweeg ik de hydraulische versie.Door de grote omsluitende kop zijn niet alle persingen te doen, let daarop bij het aanschaffen van de te persen delen.