Reseñas de clientes para VEVOR Kit de serigrafía, 6 piezas de marcos de serigrafía de aluminio, marco de serigrafía de 20 x 24 pulgadas con malla de 110 unidades, malla de nailon de alta tensión y cinta selladora para camisetas, impresión DIY

La verdad no me gustaron, el aluminio es delgado y no están lo suficientemente tensados, nada que ver con los que había comprado antes aquí.

la tension n'est pas bonne ,pas assez tendu..!!!!!!!!!!!!!!!!!!

These a SUPER LOW Tension screens! Thought I would give them a try. For me they will not work. While coating with a scoop I had good tension on the sides but it will lay down a super thick layer on the middle. Tried 110 and 160 mesh. Same problem. Just my experience tho.

Cadre ridiculement petit, autant prendre directement plus grand.

These are not that great in quality. Very disappointed as the frames are very flimsy. We have to put two together just to use them.

About 18 months ago these were the best value screens you could get, tight mesh, with good welds and adhesive. They have since changed supplier I believe, and are now poorly made (have ordered 2 sets in the last year to confirm this wasn't a one off). They have far looser mesh of lower quality, poor welds on each corner so they are flimsy, with gaps so water can get in, weaker adhesive holding the mesh and even the metal frames themselves are much thinner and less sturdy. Would highly recommend just paying more somewhere else for screens that actually work properly.

The tension is way too low to get a good print, not recommended for any serious work.

I have a few other Vevor products that I love using, this was not one. As someone who screenprints for my business these would not work. I thought for the price let's see what the product was like. The quality is flimsy, and the screen tension is not even close to what would be required to have a clean print. I'm not hating on Vevor as I said my other products from them are well built so I don't really like to give them a bad review. These would be fine if you're not printing high quality garments.

I won't order these again. These couldn't be much worse. There is no way I'm putting these screens in the exposure unit. The corners and edges are all quite sharp, just asking to put a hole in the neoprene of the vacuum system. The edges are held down with foil tape? And a while roll of foil tape in the hox, what's that for. I think they are crappy, I guess I'm used to quality equipment.

These are not that great in quality. Very disappointed as the frames are very flimsy. We have to put two together just to use them.