Reseñas de clientes para Limpiador ultrasónico de discos de vinilo VEVOR de 6 l y 40 kHz, máquina de limpieza ultrasónica para vinilos, control de perilla, limpiador ultrasónico para 4 discos, limpiador sónico de vinilo, tanque de acero inoxidable con calentador mecánico y temporizador.

Hyvä ja toimii.

Great ultrasonic parts cleaner for the price. I’ve used this VEVOR cleaner on several automotive and mechanical parts, and it does an excellent job removing grease, grime, carbon buildup, and dirt from areas that are almost impossible to reach by hand. The heater gets the solution up to temperature nicely, the controls are easy to operate, and the ultrasonic cleaning action works surprisingly well on stubborn buildup. The stainless-steel tank is sturdy and easy to clean when you’re finished. It has saved me a lot of time compared with scrubbing parts by hand. If you work on engines, carburetors, small engine parts, or other mechanical equipment, this is a very handy machine to have in the shop. I’m very satisfied with it and would definitely buy it again

Pas encore utilisé je l'utiliserai la semaine prochaine on verra après utilisation

Good, does what it says.

This works very well for LP records cleaning. Especially after replacing the spinner motor 24v DC power supply with less powerful 9v DC power supply and now the records spin about 2,5rpm. Only minus was that the tanks emptying valve was rusty/dirty. It got better after cleaning with water and alcohol but dirt is something that shouldn't be in LP cleaning equipment. But for this price I didn't expect top tier quality. The loud noise can be silenced with towel under the machine. I can totally recommend this!

I don't own a single vinyl album so cannot comment on this tool's intended usage, but for a woodworker, it's a game changer. Spending 20 minutes with a brass wire brush scraping sap and resin off of each of the 96 teeth on a miter saw crosscut blade (after letting the blade soak in hot, soapy water for an hour) is a major inconvenience—so much so that I would often let my blades go for too long without cleaning them. The result, of course, is increased cut times, excessive heat build up, scorch marks on the wood, and a generally unpleasant time. And that was still preferable to giving the blade a good cleaning. This cleaner changed everything. I can get a blade looking good as new in about 60 seconds using nothing more than tap water and a splash of dish soap. I still don't tire of turning on the ultrasonic cleaner and watching my water turn brown in an instant as pitch, tar, and resin get ejected from my blades. It's like magic. It'll clean a 10" blade on the included spinner without a problem, even if the shaft isn't perfectly aligned on the larger arbor and it wobbles around a bit. For a 12" blade, the clearance between the teeth and the sides of the container is about 3/16" if the blade is perfectly centered, which means that wobbling around a bit isn't an option. You'll need to make a custom 1" spacer to fit perfectly inside the sawblade's arbor; a hole saw and bit of scrap wood work nicely for this. I've also successfully cleaned 115" bandsaw blades. You'll never get the whole blade in at once, but by soaking the lower part of the blade and manually turning it every few seconds to expose the dirty parts to the water, you'll eventually get your whole bandsaw blade cleaned in way less time than it would take to scrub it. I've also cleaned router bits by suspending them from a cord in the water (after removing any bearings) since I didn't think the metal blades bouncing around against the metal container was a good idea. The petcock at the bottom to drain the water is fantastic. The heater is great and keeps the water nice and toasty. The build quality seems good, though I do wish the manufacturer had done a better job of water proofing a device that is destined to live its live around water; you can actually see some circuit board through slits in the metal body. Things I would change: I wish the spinner rotated about 1/4 as fast as it does. Each tooth is exposed to the water for maybe three seconds before coming out (although even given that, it does work wonders). I wish there were included 5/8" and 1" spacers for sawblade arbors, but I get that this is designed as record cleaning tool. Seriously, if you're a woodworker, this is a game changer.

I didn't expect much given the price, but I was pleasantly surprised to find that it works amazingly! It literally removed a skip/repeat section that spin clean couldn't fix. It made the sound floor much quieter, much less static and noise. Still experimenting with solutions, but straight distilled water works wonders. I bought a variable voltage charger for the spinning motor so that it spins much slower than stock. I also bought label covers so they don't get wet. Both from Amazon.

It’s better than expected. We have been clean8ng up some old Bakelite records and this Is definitely making a big difference. It’s definitely been worth the money and is a great little machine.

Attention , si vous remplissez raisonnablement la cuve jusqu'au trait la contenance est de 1.85l et a ras bord 2.85 l mais cela déborde en fonctionnement .

Zum Lp's reinigen gut. Etwas laut, aber Preis/L! eistung top