Reseñas de clientes para Revestimiento para estanque VEVOR LLDPE de 4,5 x 6 m, 20 milésimas de pulgada, para cascadas, estanques y estanques de peces

Good product overall but I dont get it, I’ve ordered 5 others and they were all at 20 feet… and this one wasn’t… it was at 19’ and 9 inches… why? Still it is a good product but if you count on getting some, make sure you order a bit more on the size as they dont seem to be constant… even the way it was folded was different and more complicated to open up without making a hole in it since it’s rather big.

Can't measure? Is minimum 6in shorter on both the length and width.

This is not roofing quality epdm, it is extremely heat sensitive and will stick together if in sunlight Would not recommend for most applications. Be warned

Bought to use in Koi pond. It's very stiff, difficult to work with. But decided to keep it. And after going to all the trouble of moving rocks, plants and fish, and installing-by myself. I'm very disappointed to see it is already leaking. Much worse leak than the liner I replaced. So now I have to fill the pond daily to keep my fish alive til I can find another liner. Waste of money and effort and time. Sadly I will rethink purchasing anything else from vevor

It's basically a thicker tarp. Would not be easy to install due to the stiffness of the material. But you get what you pay for. Unsure if I'm going to keep it or return, depends on cost of returning.. If I do keep it I'll layer something else under it. I wouldn't trust this alone. It's a major ordeal to change out pond liners so I definitely don't want to do this again in a couple of years.

This is the second one that I bought and same as the other one it leaked in several spots

The pond liner leaked in several spots

This Stuff is Great Flat or slightly sloped however if your Deep it’s a waste of money it is not pliable in contoured conditions: my pond has a 4ft deep spot and a 5..5 foot drop Off point these types of deep spots Need Thiicker Rubber like Firestone

I was expecting this to match my existing epdm that is soft and not slippery. This was hard, kinks dont lay flat and is very very slippery. Im not sure if the one sent to me was the tcp or a differnt type of epdm. Ill be looking around to match my existing.

Tough material. Does not bend or shape into the pond.