Reseñas de clientes para VEVOR Pelacables Manual Marco de Aluminio Peladora de Cable Rango de Calibre de 1,5-38 mm Peladora de Alambre Manual Referencia Visible de Profundidad de Pelado Pelacables para Reciclaje de Cobre

plastic adjusting knob on top broke first time I used it. very cheap. used 2 nuts and James them together. now and use a socket and ratchet to adjust.

Very surprised and disappointed at lack of quality check of unit before packing and shipping. Unit came partially assembled, Black plastic handle was already attached to metal handle arm which should attach to main body. Main body comes with a black metal D-shaft section (drive flat section) so as to attach the handle arm securely. The handle arm does not come with a corresponding D shaped hole in the arm,this would have improved its build quality. When trying to attach the handle arm to the shaft, it was noticed that the threaded pilot hole for the M8*12 hexagon screw (item 6 page 5) was not in the correct position on the arm. The M8 threaded hole appears to have been incorrectly installed at the wrong end of the handle arm next to the black plastic cylindrical handle. This has made the unit inoperable unless, we drill and tap the handle arm ourselves or replace the handle arm with an arm incorporating a D-shaft slot and M8 threaded locking screw hole. When you purchase a piece of equipment, we would normally expect to be able to use it fairly quickly once bolted and screwed together. In this situation, unit is unusable until handle issues are resolved.

The wire stripper works but is very difficult to keep the wire from twisting off the track. It could easily and cheaply be remedied by creating a tension-based restriction on both ends to hold the wire in an exact position and prevent twisting off the cutting wheel.

First thing I was disappointed with was the plastic turn knob. It broke straight out the box. Didn’t even get to strip one piece of wire yet. I’m unable to upload a photo it seems my phone takes pictures that exceed 2mb or are larger than permitted. Gee thanks

Kinda easy to use but not very easy to use..... once I get the unit set for the wire gauge, it works great but it is a hassle to get it set. Definitely not easy to quickly change between wire gauges or types, but once set, works quite well.

This manual stripper is a great product if your looking to save your hands the trouble of stripping with them alone. Found that timing on strips per minute are much slower than just a utility knife and technique.

Denudeuse de bonne qualité il faut un peu de temps pour se faire la main a voir a l'utilisation si elle dure dans le temps

Don’t work half the time it’s just annoying

This product was defective upon receiving it. I do not know if this is the case for alot of these items. The quality is sub par for sure. Feeding bracket did not line up with blade or even the gears to pull it through. It was always crooked when fed through.

Item doenst work well at all. the wire doesnt feed through straight and works its way up the taperd wheels and stops running against the blade. No adjustment possible to fix the issue.