Reseñas de clientes para VEVOR Pelacables Manual Marco de Aluminio Peladora de Cable Rango de Calibre de 1,5-38 mm Peladora de Alambre Manual Referencia Visible de Profundidad de Pelado Pelacables para Reciclaje de Cobre

i can not seem to strip the insulation evenly. it does not strip the complete 16"s as an example is there a video on proper adjustment

Does not work at all for smaller wires like 12 or 10 Gauge.

Erfüllt nicht meine Erwartungen. Die Kabelführung und Schälung ist unpräzise. Litzenkabel und Adern lassen sich kaum, bzw. schlecht entmanteln.

Machine qui ne dénude pas vraiment les fils électrique. Une fois le fils enclencher vous régler la pression de coupe, trop de pression le fil s'écarte de la molette, la pression trop insuffisante, le fils ne se coupe pas. Très mauvais produit.

Poslali mi úplne iný model.

Payed for the machine. Never delivered So no money no machine

NUL. Cette machine à dénuder est une arnaque. Réglage trop minutieux et la plus part du temps impossible pour centrer les engrenages et le disque de coupe. Inutilisable pour des fils de 1.5 ou 2.5mm². Le fil à dénuder sort de l'emplacement de coupe au bout de 2cm.

plastic adjusting knob on top broke first time I used it. very cheap. used 2 nuts and James them together. now and use a socket and ratchet to adjust.

Very surprised and disappointed at lack of quality check of unit before packing and shipping. Unit came partially assembled, Black plastic handle was already attached to metal handle arm which should attach to main body. Main body comes with a black metal D-shaft section (drive flat section) so as to attach the handle arm securely. The handle arm does not come with a corresponding D shaped hole in the arm,this would have improved its build quality. When trying to attach the handle arm to the shaft, it was noticed that the threaded pilot hole for the M8*12 hexagon screw (item 6 page 5) was not in the correct position on the arm. The M8 threaded hole appears to have been incorrectly installed at the wrong end of the handle arm next to the black plastic cylindrical handle. This has made the unit inoperable unless, we drill and tap the handle arm ourselves or replace the handle arm with an arm incorporating a D-shaft slot and M8 threaded locking screw hole. When you purchase a piece of equipment, we would normally expect to be able to use it fairly quickly once bolted and screwed together. In this situation, unit is unusable until handle issues are resolved.

Nogal lichte machine, een kabel moety er meerdere keren door gehaald worden.