Reseñas de clientes para VEVOR Pelacables Manual Marco de Aluminio Peladora de Cable Rango de Calibre de 1,5-38 mm Peladora de Alambre Manual Referencia Visible de Profundidad de Pelado Pelacables para Reciclaje de Cobre

Works good for about 200ft of insulation then dulls after that you have to sharpen it to frequent to viable for use

Waardeloze machine! Massieve koper kabels draait ie om het tandwiel heen, of schieten de motor in. Dunne normale koper kabels schieten steeds onder het mes weg! Mijn schoonzoon heeft de duurdere versie en die is vele malen beter! Die doet zijn werk l. Deze machine bezorgd he alleen maar extra werk! Motor word kokend heet na 5 minuten aan staan Ik raad deze machine zeer zeker af!!!

It came to me and a damaged package and it don’t work

ordered over 6 weeks ago never came. just says delayed. so I cancelled the order.

wat een waardeloos ding

The wire wouldn’t stay in place. The cutting wheel was off center of the drive wheels. It’s cheaply made. The gear where the handle attaches broke. Lasted 3 days.

I don’t mind the machine. When he it got here it had so so many issues. Maybe it got dropped in transit or something. But we I tried to get it resolved I sent pictures in and videos in and they kept saying “we can’t see a problem with it”. The whole thing was out of balance, it made a horrible grinding noise when turned on and an even worse one when I ran wire through it. And the instructions are awful when it comes to tuning or fixing anything on it. But since the company seemed inclined to be as little help as possible I took it in my own hands. I tore the whole thing apart, I found tons gunk and corrosion in the rotating part of the machine that was not allowing it to rotate properly, I don’t know if the machine was a used one or if it had just sat for a long time. And then I pulled the motor apart because it was clicking super super bad and found a loose piece of metal in it. Honestly could find where it went but seemed like a scrap piece that had accidentally but dropped in there prior to closing the machine up. I also found problems in there. The motor had tons of loose components and was falling apart it seemed. Everything was loose and on the verge of falling apart. Fortunately I got everything cleaned up and it put back together. And it runs like a champ now. I’ve done thousands of feet and the machine still purrs nicely. But not worth the 8+ hours to fix it

me suis servis de cette machine 2 heures résultat , les gaines sautent souvent si elle s'enroulent pas dans le rouleau et au niveau du moteur au bout d'un moment j'ai eu un bruit fort c'etait le cache supérieur de l'hélice qui frottait du coup le moteur a chauffé et ca a cramé l'hélice en plastique sur le haut pour un produit a ce prix la je recommande pas et recommanderait plus chez eux vu leurs sav tres insatisfaisant

Konnte das Gerät nie verwenden weil es zerbrochen ankam. Der Service wollte mir ein Ersatzteil schicken das aber verschwunden wäre also komplett unfähig, wollten mir dann einen Gutschein von 75 € schicken. Das Gerät kostet 260 €. Sie tauschen absolut nicht s aus. Völlig unkobetent.

Arrived broken during shipping. I bought the coverage to cover damage in transit. That did jack all for me. They never got back to me about my return inquiry. Don't buy it from here. It's a great stripper that many of my fellow electricians use. Direct from vevors site is a waste of time and money.