Reseñas de clientes para Perforadora de diamante VEVOR, equipo de perforación de núcleo de hormigón húmedo de 25 cm con ruedas de soporte, velocidad de 750 RPM, rosca de 3,2 cm y asa de elevación, diámetro de perforación de 25 cm para hormigón, ladrillo, bloque, piedra, 2500 W
Montaje en Soporte 254 mm Brocas No Incluidas
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
336 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Ottimo prodotto
Ottimo prodotto! Arrivato in tre giorni come da ordine. Acquistato per fare alcuni fori in muri di cemento e sassi di 60 centimetri, con una prolunga da 40 cm li ha fatti senza problemi!
Anche la corona è ancora in ottimo stato.
Difetti: Mancanza di istruzioni e imballaggio semi distrutto....per fortuna non si è rotto o perso niente.
1 personas encontraron esto útil
Traducir reseña a Español
Mașina de carotat
Achiziționat de aproape 2 ani cele mai multe gauri au fost de 132 dar și de 230 mm
1 personas encontraron esto útil
Traducir reseña a Español
Degelijke robuuste kwaliteit
Mooi verpakt toegekomen, moet nog getest worden.
Ik had een boor van 200mm verwacht, maar ben te snel geweest bij het bestellen. Er staat wel degelijk 107mm bijgeleverd.
3 personas encontraron esto útil
Traducir reseña a Español
Läuft sehr gut
Heute die erste 110mm kernbohrung in doppelt armiertem stahlbeton gemacht, läuft hervorragend. Habe sie mit 2 m12 schrauben an der wand fixiert, hielt felsenfest. Freue mich auf kommende projekte.
2 personas encontraron esto útil
Traducir reseña a Español
Equipment & Tool Procurement
Montaje en Soporte 254 mm Brocas No Incluidas
Bought this to replace a name-brand core drilling machine that burned up. Haven't used it yet, but got it all set up and tested to make sure the motor turned. The machine is well-built and easily matches the look and feel of a much more expensive model/brand. Be prepared for terrible packaging. I received the box and fully expected many things to be broken/bent/missing from the look of it. There was hardly any internal support for such a heavy item, and several areas had been completely punched through the cardboard from things moving around inside. Fortunately, nothing was missing or bent, and the rub damage was tolerable, but fair warning. I plan to update again after the machine has been used.
2 personas encontraron esto útil
Traducir reseña a Español
Surprenant
Plutôt suspicieux et circonspect à l'achat par rapport à d'autres marques de reference, résultats au delà de mes espérances, j'ai pu faire plusieurs carottes sur des murs en pierre granit de 60-70 cm avec rallonge, le plus long étant la préparation du support qui ne doit absolument pas bouger. Sans doute pas fait pour un usage professionnel mais uniquement occasionnel.
5 personas encontraron esto útil
Traducir reseña a Español
Not for sissy holes
We beat the hell out of this thing.
First hole took all of 8 minutes to drill through 14" of concrete, being gently.
Second hole: Found a weak spot of concrete- blew the mounting bolt out of the wall, and dropped the whole rig, jammed the bit into the wall, and spent an hour fighting it back out.
Worth all the dollars you'll save
Slapped a new bit on, set it back up, and pounded right on through the rest of the hole with no issues
1 personas encontraron esto útil
Traducir reseña a Español
Patience and careful preparation are essential.
Montaje en Soporte 203 mm 1 Broca (108 mm)
I placed the order for this core drill on August 4, 2026. It arrived earlier than expected in excellent condition. I first assembled and used it on September 11, and again on September 13, 2026. The drill and the core bits I used exceeded my expectations in both quality and performance. This was the smallest fixed motor and base / bar assembly I could purchase. Having used core drills on occasion during my 49 years in the construction industry, I wanted to avoid the smaller and more portable hand held core drill options for the sake of personal safety, and to facilitate better drilling precision. Being a smaller drill, the base and stand assembly were neither as heavy nor as versatile as the larger drills may have been, but with careful set up and a slow but steady approach to the drilling operation, I accomplished everything I needed to do very successfully. Patience and careful preparation are essential for successful concrete core drilling. The larger the holes one needs to drill, the more critical preparation and patience become. I was drilling 2.5" and 3.5" holes to accommodate fence posts in a concrete block retaining wall and a poured concrete sidewalk. Each format required a different setup. Two components that were excluded from the accessories were a hose adapter to connect my garden hose to the water supply hose provided, and a second wrench large enough to remove the core bits from the drill. I was able to purchase both of those items locally. All in all, I'm very happy with these products and this purchase.
3 personas encontraron esto útil
Traducir reseña a Español
Super je
Za prvič vtisak je odličen stroj tudi kronski sveder
12 personas encontraron esto útil
Traducir reseña a Español
Good product, slow shipping
Very happy with this purchase! Everything as expected and arrived in good shape. Shipping was a week late, but packaged well and sturdy
0 personas encontraron esto útil
Traducir reseña a Español